1-800-723-5359

Metalworking Tools and Supplies

Shop

Express Order

Model # Qty

Info

Contact

Account

Quick Change Tool Holders- 100-400 Series

Wedge Type Quick Change Tool Post Sets

Quick Change Tool Post Sets.
Wedge locking system.
All working parts hardened and ground.
These quality imported sets are compatible with Aloris and Dorian tooling.
Machineable bottom holding plate allows mating to variable compound slots.

Change tools in seconds. Place the toolholder on the toolpost's dovetail, adjust the tool's height with the knurled wheel, lock the nut, and lock the wedge. No shims necessary.

Each set includes:
one Tool Post
one Tool Holder style 1 (turning and facing)
one Tool Holder style 2 (turning, facing, and light boring)
one Tool Holder style 4 (boring)
one Tool Holder style 7 (parting/ cut-off)
one Tool Holder style 10 (knurling)

For the specs of the different style toolholders (1, 2, 4, 7, or 10) in each size series (100, 200, 300, or 400) see the additional category listings further below on this page.

To order the correct quick change lathe tool post for your machine, measure the CENTER HEIGHT of your lathe: this is the distance from the height of the top of the lathe's compound rest to the height of the spindle/chuck centerline.
Match your lathe's center height to a toolpost with a compatible center height range.

In situations where your lathe will accommodate more than one size tool post, secondary variables (such as swing, tool size capacity, rigidity, etc.) should then be considered to select the post that you want for your machine.
Check the individual listings of the different style toolholders below to see the capacities of each series.
Quantity Price Model Description Center Height Swing

$251.00 QC-100-ST
100 Quick Change Tool Post Set - Wedge ('AXA' sizing) 1643-0600 7/8"- 1 5/8" 12"

$295.00 QC-200-ST
200 Quick Change Tool Post Set - Wedge ('BXA' sizing) 1643-0605 1 1/16"- 2 1/8" 10"- 15"

$430.00 QC-300-ST
300 Quick Change Tool Post Set - Wedge ('CXA' sizing) 1643-0610 1 1/4"- 2 1/4" 13"- 18"

$549.00 QC-400-ST
400 Quick Change Tool Post Set - Wedge ('CA' sizing) 1643-0615 1 9/16"- 2 3/4" 14"- 20"

Wedge Type Quick Change Tool Posts

Quick Change Tool Posts.
Wedge locking system. All working parts hardened and ground.
These quality imported toolposts are compatible with Aloris and Dorian tooling.
Machineable bottom holding plate allows mating to variable compound slots.

Change tools in seconds. Place the toolholder on the toolpost's dovetail, adjust the tool's height with the knurled wheel, lock the nut, and lock the wedge. No shims necessary.

Use 100 series tool holders for 100 series tool posts, 200 series tool holders for 200 series tool posts,etc.

To order the correct quick change lathe tool post for your machine, measure the CENTER HEIGHT of your lathe: this is the distance from the height of the top of the lathe's compound rest to the height of the spindle/chuck centerline.
Match your lathe's center height to a toolpost with a compatible center height range.

In situations where your lathe will accommodate more than one size tool post, secondary variables (such as swing, tool size capacity, rigidity, etc.) should then be considered to select the post that you want for your machine.
Check the individual listings of the different style toolholders below to see the capacities of each series.
Quantity Price Model Description Center Height Swing

$155.00 QC-100-TP
Quick Change Tool Post (Wedge) 12" Swing, 1643-0500 7/8"- 1 5/8" 12"

$175.00 QC-200-TP
Quick Change Tool Post (Wedge) 10"-15" Swing, 1643-0505 1 1/16"- 2 1/8" 10"- 15"

$245.00 QC-300-TP
Quick Change Tool Post (Wedge) 13"-18" Swing, 1643-0510 1 1/4"- 2 1/4" 13"- 18"

$315.00 QC-400-TP
Quick Change Tool Post (Wedge) 14"-20" Swing, 1643-0515 1 9/16"- 2 3/4" 14"- 20"

Style 1 Quick Change Tool Holders for Turning and Facing

Quick Change Tool Holders.
Style 1 for turning and facing.

Use 100 series tool holders for 100 series tool posts, 200 series tool holders for 200 series tool posts,etc.

Style 1 tool holders do not include tool bits.
Quantity Price Model Description A B C D Toolbit Sizes

$27.00 QC-100-1
#1 Turning and Facing Holder- 100 Series, 1643-0025 15/16" 1/2" 7/16" 1 1/2" 3/16"- 1/2"

$29.00 QC-200-1
#1 Turning and Facing Holder- 200 Series, 1643-0030 1 1/8" 5/8" 1/2" 1 3/4" 1/4"- 5/8"

$40.00 QC-300-1
#1 Turning and Facing Holder- 300 Series, 1643-0035 1 7/16" 3/4" 5/8" 2 1/8" 1/2"- 3/4"

$49.00 QC-400-1
#1 Turning and Facing Holder- 400 Series, 1643-0040 1 11/16" 1" 3/4" 2 1/2" 1/2"- 1"

Style 2 Quick Change Tool Holders for Turning, Facing, and Boring

Quick Change Tool Holders. Style 2 for turning, facing, and boring.
Style 2 holders are identical to Style 1 holders, with the addition of a milled V-groove for round-bar holding.

Use 100 series tool holders for 100 series tool posts, 200 series tool holders for 200 series tool posts,etc.

Style 2 tool holders do not include any tool bits or boring bars.
Quantity Price Model Description A C D Toolbit Sizes Shank Diameter

$28.00 QC-100-2
# 2 Turn, Face, Bore Holder-100 Series, 1643-0045 15/16" 7/16" 1 1/2" 3/16"- 1/2" 7/16"

$31.00 QC-200-2
# 2 Turn, Face, Bore Holder-200 Series, 1643-0050 1 1/8" 1/2" 1 3/4" 1/4"- 5/8" 1/2"

$41.00 QC-300-2
# 2 Turn, Face, Bore Holder-300 Series, 1643-0055 1 7/16" 5/8" 2 1/8" 1/2"- 3/4" 3/4"

$52.00 QC-400-2
# 2 Turn, Face, Bore Holder-400 Series, 1643-0060 1 11/16" 3/4" 2 1/2" 1/2"- 1" 13/16"

Style 4 Quick Change Tool Holders for Boring

Quick Change Tool Holders.
Style 4 for heavy duty boring.
Supplied with split bushing which allows a smaller diameter boring bar to be used.
The measurement D Large is the larger diameter boring bar that may be held without the bushing installed.
The measurement D Small is the smaller diameter boring bar that may be held with the bushing installed.

Use 100 series tool holders for 100 series tool posts, 200 series tool holders for 200 series tool posts,etc.

Style 4 tool holders do not include boring bars.
Quantity Price Model Description A B D Large D Small

$41.00 QC-100-4
# 4 Boring Bar Holder-100 Series, 1643-0065 3/4" 1 1/2" 3/4" 5/8"

$49.00 QC-200-4
# 4 Boring Bar Holder-200 Series, 1643-0070 1" 2" 1" 3/4"

$58.00 QC-300-4
# 4 Boring Bar Holder-300 Series, 1643-0075 1" 2" 1" 3/4"

$73.00 QC-400-4
# 4 Boring Bar Holder-400 Series, 1643-0080 1 3/8" 2 3/4" 1 1/4" 1"

Style 7 Quick Change Tool Holders for Cut Off

Quick Change Tool Holders.
Style 7 for cut-off and parting operations.
These toolholders use P-style cut-off blades (blades with a T-shape cross section).
Rake angle is 4 degrees.

Use 100 series tool holders for 100 series tool posts, 200 series tool holders for 200 series tool posts,etc.

Style 7 tool holders do not include cut-off blades.
Quantity Price Model Description A B (blade height) C D

$43.00 QC-100-7
# 7 Cut Off Holder-100 Series, 1643-0085 13/16" 1/2" 3/16" 1 1/2"

$44.00 QC-200-7
# 7 Cut Off Holder-200 Series, 1643-0090 1" 11/16" 3/16" 1 3/4"

$55.00 QC-300-7
# 7 Cut Off Holder-300 Series, 1643-0095 1 3/16" 3/4" 3/16" 2"

$73.00 QC-400-7
# 7 Cut Off Holder-400 Series, 1643-0100 1 7/16" 7/8" 1/4" 2 1/2"

Style 10 Quick Change Tool Holders for Knurling

Quick Change Tool Holders.
Style 10 for knurling operations.
These toolholders also hold square bits for turning and facing operations.
Style 10 toolholders include one pair of knurls but do not include tool bits

Use 100 series tool holders for 100 series tool posts, 200 series tool holders for 200 series tool posts,etc.

Quantity Price Model Description A C E E1 Turning Bit Size

$51.00 QC-100-10
# 10 Knurling Holder-100 Series, 1643-0105 7/8" 1 9/16" 1/2" 3/8" 3/16"- 1/2"

$58.00 QC-200-10
# 10 Knurling Holder-200 Series, 1643-0110 1" 1 3/4" 5/8" 1/2" 1/4"- 5/8"

$67.00 QC-300-10
# 10 Knurling Holder-300 Series, 1643-0115 1 3/16" 2" 3/4" 5/8" 1/2"- 3/4"

$76.00 QC-400-10
# 10 Knurling Holder-400 Series, 1643-0120 1 7/16" 2 1/2" 1" 3/4" 1/2"- 1"