2" Carbide Insert End Mill - 1 Inch Shank
Model #: IEM-2000-W1
- Cutting Diameter: 2"
- Number of Inserts: 3
- I.C.: 3/8"
- Shank: 1"
- Positive rake, 90 Degree right hand cut.
Adaptable for N.C. machining.
Cutting rake angle 0 Degree;
Axial rake angle 0 Degree;
Setting angle 90 Degree.
Each end mill includes 1 set of screws.
These end mills typically use TPU, TPG, or TPC-32YR triangular inserts with the appropriate I.C. dimension.
Inserts are NOT included with the end mill.