1-800-723-5359

Metalworking Tools and Supplies

Shop

Express Order

Model # Qty

Info

Contact

Account

Gaging and QC

Pin Gage Sets

Each gage is marked with size and tolerance ( + or -).
Minus tolerance (most popular) is +0/- .0002".
Plus tolerance is -0/+ .0002".

In fitted plastic case. (except MC-3M where case style may vary).
Quantity Price Model Description Range # of gages

$29.90 MC-0M
.011"- .060" Minus Tolerance Pin Gage Set .011-.060" 50

$59.50 MC-1M
.061"- .250" Minus Tolerance Pin Gage Set .061-.250" 190

$99.50 MC-2M
.251"- .500" Minus Tolerance Pin Gage Set .251-.500" 250

$99.50 MC-3M
.501"- .625" Minus Tolerance Pin Gage Set .501-.625" 125

$99.50 MC-4M
.626-.750" Minus Tolerance Pin Gage Set .626-.750" 125

$59.50 MC-1P
.061"- .250" Plus Tolerance Pin Gage Set .061-.250" 190

$59.50 MC-15P
.0615"- .2505" Plus Tolerance Pin Gage Set .0615-.2505" 190

$99.50 MC-2P
.251"- .500" Plus Tolerance Pin Gage Set .251-.500" 250

$99.50 MC-3P
.501"- .625" Plus Tolerance Pin Gage Set .501-.625" 125

$99.50 MC-4P
.626"- .750" Plus Tolerance Pin Gage Set .626-.750" 125

Gage Block Sets

Grade B (+/-.000050") gage block sets.
Certified accurate to federal specification GGG-G-15C (Note: cert is not traceable to NBS).
In fitted wooden case.
Hardened, seasoned steel.
Each gage block is serial numbered.

Model GB-36 contains:
.050" - 1 block
.1001"- .1009" by .0001" - 9 blocks
.101"- .109" by .001" - 9 blocks
.11"- .19" by .01" - 9 blocks
.1"- .5 by .1 - 5 blocks
1", 2" and 4" - 3 blocks.

Model GB-81 contains:
.1001"- .1009" by .0001" - 9 blocks
.101"- .149" by .001" - 49 blocks
.05"- .95" by .05" - 19 blocks
1"- 4" by 1" - 4 blocks
Quantity Price Model Description

$59.90 GB-36
36 Piece Gage Block Set

$89.90 GB-81
81 Piece Gage Block Set

1/8 inch 10 Pair Thin Parallel Set

Made of high grade alloy steel, hardened and ground. 2 holes in each parallel. Plastic case included.
Useful for layout work on milling machines and drill presses.

All parallels 1/8" thick x 6" long, with one pair of each of the following heights:
1/2" , 5/8", 3/4", 7/8", 1", 1 1/8", 1 1/4", 1 3/8", 1 1/2", 1 5/8"

Height tolerance: +/- .001"
Parallelism in height of each pair: +/- .0002" .
Hardness: 54-58 HRC.

Quantity Price Model Description

$31.90 PP-18
1/8" Thin Parallel Set, 10 Pair

Telescoping Gage Sets

6-Piece Telescoping Gage Sets.

Double action, self-centering gages for taking inside measurements. The set of 6 gages will take measurements ranging from 5/16"- 6" (8mm- 150mm.)
Hardened and ground contact points.
Constant spring tension for uniform feel.
Knurled, rigid handle.
Sets are supplied in a fitted case.

A telescoping gage's spring-loaded contact points expand in the hole to be measured, and are then locked in place with the handle end-screw. The gage is then removed from the hole, and the hole size is obtained by measuring over the gage's contact points with a micrometer.

Sale on Combo set (model GA-5903-ST) which also includes 4 piece small hole gage set measuring from .125" to .5".
Quantity Price Model Description Made in / by

$15.95 GA-5903
5/16 - 6" Telescoping Gage Set VME

$24.90 GA-5903-ST
GA-SM290E Small Hole Gage and GA-5903 Telescoping Gage Set Combo (1/8 - 6" ) VME

$91.00 PEC-3S-6
PEC-3S-6 USA 5/16 - 6" Telescoping Gage Set PEC Tools

$119.00 GEN-S98-6
5/16 - 6" General Telescoping Gage Set General

Mitutoyo Surplus Sale

High Quality Mitutoyo measuring instruments.
40% off list price
Limited to quantity in stock.
For more details please call or refer to Mitutoyo's online catalog at www.mitutoyo.com
If ordering by phone, you must give us the model number (ending with BB) to get the sale price.
Quantity Price Model Description List Price Description Specs

$216.90 MIT-106-102BB
MICRON MICROMETER NRS 351.00 Friction Thimble, non rotating spindle 0-1"/.0001"

$249.70 MIT-106-104BB
MICRON MICROMETER NRS 404.00 Friction Thimble, non rotating spindle 1-2"/.0001"

$120.50 MIT-112-177BB
POINT MICROMETER 195.00 Without Carbide Points A=15, L=.394" 0-1"/.001"

$164.40 MIT-112-190BB
POINT MICROMETER W/CAR 266.00 With Carbide Points A=15, L=.430" 1-2"/.001"

$127.90 MIT-112-238BB
POINT MICROMETER W/CAR 207.00 With Carbide Points A=30, L=.430", and Standard 1-2"/.001"

$166.20 MIT-123-128BB
DISC MICROMETER 269.00 Disc Diameter .79" with Standard 3-4"/.001"

$394.30 MIT-133-903BB
2-6 INSIDE MICROMETER SET 638.00 4 PIECE SET 2-6"

$104.40 MIT-141-102BB
INSIDE MICROMETER W/I.R. 169.00 Include 141-002 and 2 pcs rods 1-2"/.001"

$126.70 MIT-142-225BB
POINT MICROMETER W/DC 205.00 Without Carbide Points A=30, L=.430" 0-1"/.001"

$118.70 MIT-147-106BB
CAN SEAM MICROMETER 192.00 . 0-.5"/.001"

$33.60 MIT-148-112BB
MICROMETER HEAD 54.40 . 0-.5"/.001"

$36.60 MIT-148-502BB
MICROMETER HEAD 59.20 With Clamp Nut 0-.5"/.001"

$36.60 MIT-149-148BB
MICROMETER HEAD 59.20 . 0-.5"/.001"

$62.40 MIT-151-224BB
MICROMETER HEAD 101.00 . 0-25mm/.01mm

$135.30 MIT-159-212BB
1-2 COMBI MICROMETER 219.00 Friction Thimble 1-2"/.0001"

$148.30 MIT-159-215BB
4-5 COMBI MICROMETER . . 4-5"

$217.50 MIT-169-204BB
DISC MICROMETER 352.00 Disc Diameter .79" with Standard 1-2"/.001"

$103.20 MIT-177-184BB
SETTING RING GAGE, 1.0IN 167.00 . 1.0" (size)

$90.20 MIT-181-142BB
UNIV V-BLOCK 146.00 . .

$90.80 MIT-181-941BB
UNIV V-BLOCK 147.00 . .

$39.20 MIT-184-313BB
THICKNESS GAGE 63.45 Tapered Leaves 28 Leaves, 100 mm long