1-800-723-5359

Metalworking Tools and Supplies

Shop

Express Order

Model # Qty

Info

Contact

Account

MITUTOYO Sale

Mitutoyo Dial Calipers

Accuracy +/- .001" (or +/- .03mm for metric models)
Direct reading in .001" (except metric models).
Mitutoyo dial calipers are made from hardened stainless steel and come with a chrome scale, thumb roll, fitted case.
Reads inside, outside, and depth.
Covered rack protects gears from dust.
Metric models have a yellow face.
Quantity Price Model Description Range Graduation Range Per Rev. Accuracy

$85.50 MIT-505-717
6" Mitutoyo Dial Caliper, .200"/Rev (SALE - List $114.00 ) 6" .001" 0.2 +/-.001"

$93.75 MIT-505-742
6" Mitutoyo Dial Caliper, .100"/Rev (SALE - List $125.00 ) 6" .001" 0.1 +/-.001"

$127.50 MIT-505-719
8" Mitutoyo Dial Caliper, .200"/Rev (SALE - List $170.00 ) 8" .001" 0.2 +/-.001"

$136.50 MIT-505-743
8" Mitutoyo Dial Caliper, .100"/Rev (SALE - List $182.00 ) 8" .001" 0.1 +/-.001"

$201.75 MIT-505-749
12" Mitutoyo Dial Caliper, .200"/Rev (SALE - List $269.00 ) 12" .001" 0.2 +/-.001"

$216.75 MIT-505-746
12" Mitutoyo Dial Caliper, .100"/Rev (SALE - List $289.00 ) 12" .001" 0.1 +/-.001"

$114.00 MIT-505-730
150mm Mitutoyo Dial Caliper 150mm .02mm 2mm +/-.03mm

$170.00 MIT-505-731
200mm Mitutoyo Dial Caliper 200mm .02mm 2mm +/-.03mm

Mitutoyo Electronic Calipers

Accuracy +/- .001"
Reads .0005"/ .01mm

With large numbers, longer battery life, and Absolute Scale.
Absolute encoder technology holds the zero point for the life of the battery.
All models feature an on/off button, one-touch inch/metric conversion button, floating zero, stainless steel construction, and a thumbroll for finer adjustments.

Includes battery and fitted plastic case.
Uses common SR44 Batteries.

Models with SPC output can be connected to a computer with the appropriate Mitutoyo cables and interface.
Quantity Price Model Description Range SPC Output?

$111.00 MIT-500-195
4" Mitutoyo Electronic Caliper (SALE - List $148.00 ) 4" No

$128.65 MIT-500-196
6" Mitutoyo Electronic Caliper (SALE - List $161.00 ) 6" No

$207.90 MIT-500-197
8" Mitutoyo Electronic Caliper 8" No

$417.60 MIT-500-193
12" Mitutoyo Electronic Caliper 12" No

$178.60 MIT-500-171
6" Mitutoyo Electronic Caliper, with output 6" Yes

$235.60 MIT-500-172
8" Mitutoyo Electronic Caliper, with output 8" Yes

$513.95 MIT-500-173
12" Mitutoyo Electronic Caliper, with output 12" Yes

$801.80 MIT-500-505
18" Mitutoyo Electronic Caliper, with output 18" Yes

$880.65 MIT-500-506
24" Mitutoyo Electronic Caliper, with output 24" Yes

Mitutoyo MyCal Lite Electronic Caliper

Range 0-6"/ 150mm
Large LCD display reads .001"/ .1mm
Accuracy +/- .005", +/- .2mm.

Stainless steel jaws, depth bar.
Battery lasts appx. 2 years.
Good choice for woodworkers.
Quantity Price Model Description

$89.25 MIT-700-113
Mitutoyo Mycal Lite Electronic Caliper (SALE - List $119.00 )

Mitutoyo Coolant-Proof Electronic Calipers

Made by Mitutoyo.
IP-67 Protection against water spray and dust.
Reads 0005"/.01mm
Absolute Encoder with origin setting
Uses 2 SR-44 batteries.
Quantity Price Model Description Range

$161.25 MIT-500-752
Mitutoyo 6" IP67 Coolant-Proof Electronic Caliper (SALE - List $215.00 ) 6"

$259.20 MIT-500-753
Mitutoyo 8" IP67 Coolant-Proof Electronic Caliper 8"

$449.10 MIT-500-754
Mitutoyo 12" IP67 Coolant-Proof Electronic Caliper 12"

Mitutoyo Electronic Thickness Gage

These Pocket Electronic Thickness Gauges set a new standard for compactness and convenience.
Perfect for quick measurements of paper, plastic, sheet steel, etc.
Only 3/4" thick by 1 3/4" by 3 3/4" long.
Capacity - .47"/ 12mm.
Reads both .0005" and .01mm. Accurate to +/- .001"/ .02mm.
Made in Japan by Mitutoyo. Battery lasts appx. 2 years.
Quantity Price Model Description

$91.50 MIT-700-118
Mitutoyo Electronic Thickness Gage (SALE - List $122.00 )

Dial Thickness Gages

Use these dial thickeness gages to measure paper, leather, sheet metal, rubber, plastic, etc.
With case.
Quantity Price Model Description Range Grad. Frame Made by

$29.00 TG-500
.500" VME Dial Thickness Gage (SALE - WAS $39.50) .500" .001" 1" VME Gages

$98.50 TEC-SI112
.500" Teclock Dial Thickness Gage .500" .001" 1" Teclock

$123.30 MIT-7300
.400" Mitutoyo Dial Thickness Gage .400" .001" 1" Mitutoyo

$204.30 MIT-7326
.050" Mitutoyo Dial Thickness Gage .050" .0001" 1" Mitutoyo

$99.75 MIT-7301
10mm Mitutoyo Dial Thickness Gage (SALE - List $133.00 ) 10mm .01mm 1" Mitutoyo

$119.25 MIT-7305
20mm Mitutoyo Dial Thickness Gage (SALE - List $159.00 ) 20mm .01mm 1" Mitutoyo

$123.00 MIT-7304
1" Mitutoyo Dial Thickness Gage (SALE - List $165.00 ) 1" .001" 1 1/8" Mitutoyo

$145.50 MIT-7322
1" Mitutoyo Dial Thickness Gage (SALE - List $194.00 ) 1" .001" 4 3/4" Mitutoyo

Mitutoyo Inside Micrometer Sets

Reading .001". With case.
141 series are interchangeable rod type inside micrometers.
Quantity Price Model Description Range Reads

$150.75 MIT-141-208
2- 8" Inside Micrometer Set (SALE - List $201.00 ) 2-8" .001

$181.50 MIT-141-233
2- 12" Inside Micrometer Set (SALE - List $242.00 ) 2-12" .001"

$288.75 MIT-141-121
8- 20" Inside Micrometer Set (SALE - List $385.00 ) 8-20" .001"

$430.50 MIT-141-122
8- 40" Inside Micrometer Set (SALE - List $574.00 ) 8-40" .001"

$181.50 MIT-141-206
50- 300mm Inside Micrometer Set (SALE - List $242.00 ) 50-300mm .01mm

Mitutoyo Tubing Micrometers

These tube micrometers are made by Mitutoyo. Measures the wall thickness of tubes, cartridges, cylinders etc.
Reads .0001", 0-1".
Quantity Price Model Description Anvil Diameter

$113.25 MIT-115-313
.187" Anvil, 0-1" MIT Tubing Micrometer (SALE - List $151.00 ) .187"

$113.25 MIT-115-314
.314" Anvil, 0-1" MIT Tubing Micrometer (SALE - List $151.00 ) .314"

Mitutoyo Outside Micrometers

The Mitutoyo micrometers listed here feature ratchet stop, except 103-135(F) and 103-136(F), which have friction thimble.
Enameled frame. These micrometers feature carbide faces, standards (except 0-1"), case, adjusting tool, locking clamp.
Mitutoyo micrometers are Made in Japan to the highest standards.
We can supply all other series of Mitutoyo micrometers, including heat-insulated frames, chrome frames, non-rotating spindles, etc. Just e-mail or call us.
Quantity Price Model Description Range Reads

$110.70 MIT-103-135
0-1" Mitutoyo Outside Micrometer 0-1" .0001"

$109.80 MIT-103-260
0-1" Mitutoyo Outside Micrometer 0-1" .0001"

$106.50 MIT-103-262
1-2" Mitutoyo Outside Micrometer (SALE - List $142.00 ) 1-2" .0001"

$108.00 MIT-103-136
1-2" Mitutoyo Outside Micrometer (SALE - List $144.00 ) 1-2" .0001"

$143.10 MIT-103-217
2-3" Mitutoyo Outside Micrometer 2-3" .0001"

$136.50 MIT-103-218
3-4" Mitutoyo Outside Micrometer (SALE - List $182.00 ) 3-4" .0001"

$178.20 MIT-103-219
4-5" Mitutoyo Outside Micrometer 4-5" .0001"

$197.10 MIT-103-220
5-6" Mitutoyo Outside Micrometer 5-6" .0001"

$223.20 MIT-103-221
6-7" Mitutoyo Outside Micrometer 6-7" .0001"

$235.80 MIT-103-222
7-8" Mitutoyo Outside Micrometer 7-8" .0001"

$261.00 MIT-103-223
8-9" Mitutoyo Outside Micrometer 8-9" .0001"

$270.90 MIT-103-224
9-10" Mitutoyo Outside Micrometer 9-10" .0001"

$283.50 MIT-103-225
10-11" Mitutoyo Outside Micrometer 10-11" .0001"

$296.10 MIT-103-226
11-12" Mitutoyo Outside Micrometer 11-12" .0001"

$100.80 MIT-103-137
0-25mm Mitutoyo Outside Micrometer 0-25mm .01mm

$117.00 MIT-103-138
25-50mm Mitutoyo Outside Micrometer 25-50mm .01mm

$112.50 MIT-103-139
50-75mm Mitutoyo Outside Micrometer (SALE - List $150.00 ) 50-75mm .01mm

$157.50 MIT-103-140
75-100mm Mitutoyo Outside Micrometer 75-100mm .01mm

Mitutoyo LCD Electronic Micrometers

These Mitutoyo micrometers read 0- 1" or 0- 25mm.
Measures .00005". LCD readout, Floating zero. Instant inch/mm conversion.
Carbide faces, includes case and SR-44 battery.

Model MIT-293-344 is shop-hardened and water resistant. Made to resist coolant spray as well as the dust generated in machining.

Model MIT-293-831 is thinner and lightweight. Battery lasts appx. 1 year for this model, 2 years for other models.
Quantity Price Model Description Style Features Spindle Lock?

$116.25 MIT-293-831
Mitutoyo Slim LCD Electronic Micrometer (SALE - List $155.00 ) ratchet slim,lightweight no

$173.70 MIT-293-344
Mitutoyo LCD Electronic Micrometer "ratchet/friction" IP 65 Water Resistant yes

Multi-Anvil Micrometers

Measures hard-to-reach locations, such as from a hole or slot to an edge, small tube wall thickness, shoulder to an edge, etc.
Complete with 2 interchangeable anvils - flat and rod anvils.
Reads .0001". Range 0-1". Carbide tipped spindle face.
With friction thimble. Includes fitted case.
Quantity Price Model Description Range Brand

$59.00 VME-UNI1
0-1" VME Multi-Anvil Micrometer (SALE - WAS $74.50 ) 0-1" VME / China

$160.50 MIT-117-107
0-1" Mitutoyo Uni-Mike (SALE - List $214.00 ) 0-1" Mitutoyo

$69.00 VME-UNI2
1-2" VME Multi-Anvil Micrometer (SALE - WAS $89.5 ) 1-2" VME / China

$188.25 MIT-117-108
1-2" Mitutoyo Uni-Mike (SALE - List $251.00 ) 1-2" Mitutoyo

Depth Micrometers

Graduation .001". Satin chrome finish.
Ratchet included for consistent measurements. Comes in fitted case.
Quantity Price Model Description Cap. Base Size Rods Made by

$51.90 VME-DM4
0-4" VME Depth Micrometer 0-4" 4" 4 VME

$191.70 MIT-129-131
0-4" Mitutoyo Depth Micrometer 0-4" 4" 4 Mitutoyo

$47.00 VME-DM6
0-6" VME Depth Micrometer (SALE - WAS $69.80 ) 0-6" 4" 6 VME

$186.75 MIT-129-132
0-6" Mitutoyo Depth Micrometer (SALE - List $249.00 ) 0-6" 4" 6 Mitutoyo

$75.00 NSK-TS06M
0-75mm NSK Depth Micrometer 0-75mm 2 1/2" 3 NSK

Mitutoyo Digimatic Indicator

Reads .0005"/ .01mm
Accuracy .0008"/ .02mm
Range 0- 1/2"

On/off switch. SPC output.
Large, 8.5mm, LCD display.
"Absolute" scale. Zero remains set for life of battery - about 20,000 hours!

With lug back (also available with flat back at same price - please call).
Quantity Price Model Description

$129.00 MIT-543-683
Mitutoyo Digimatic Indicator (BLOWOUT SALE )

Small Face Dial Indicators

AGD Group 1 Dial Indicators feature 1-11/16" face diameter.
Small dial gauges fit into tight spaces. With lug back
Choose between our economy import or Mitutoyo models.
Call for Mitutoyo metric models.
Quantity Price Model Description Range Graduations Reads Brand

$13.90 VDI-250
.250" VME Dial Ind, 1.6" Diameter Face .250" .001" 0-100 VME

$74.00 MIT-1410
.250" Mitutoyo Dial Ind, 1.6" Diam Face (SALE - List $111.00 ) .250" .001" 0-100 Mitutoyo

$74.00 MIT-1411
.250" Mitutoyo Dial Ind, 1.6" Diam Face (SALE - List $111.00 ) .250" .001" 0-50-0 Mitutoyo

$92.70 MIT-1506
.125" Mitutoyo Dial Ind, 1.6" Diam Face .125" .0005" 0-50 Mitutoyo

$69.00 MIT-1507
.125" Mitutoyo Dial Ind, 1.6" Diam Face (SALE - List $103.00 ) .125" .0005" 0-25-0 Mitutoyo

Mitutoyo Group 3 (Large Face) Dial Indicators

Mitutoyo Group 3 (Large Face) Dial Indicators for sale.
Mitutoyo indicators are furnished with lug back (unless specified as flat back).
Group 3 indicators have 2.97" face diameter.
Made to AGD standards. Top quality.
We carry the entire line of Mitutoyo Dial Gages. Only a small sample is shown here !
Quantity Price Model Description Travel Reading Graduations Rotation Dial

$109.00 MIT-3416
1" Travel, 0-100 Group 3 Mitutoyo Dial Ind (SALE - List $160.00 ) 1" .001" 0-100 YES

$109.00 MIT-3417
1" Travel, 0-50-0 Group 3 Mitutoyo Dial Ind (SALE - List $160.00 ) 1" .001" 0-50-0 YES

$159.00 MIT-3424-10
2" Travel, 0-100 Group 3 Mitutoyo Dial Ind (SALE - List $237.00 ) 2" .001" 0-100 YES

Mitutoyo Dial Test Indicators

Mitutoyo horizontal type Dial Test Indicators.
Available by itself or in a set including model ACC-IH-22 Holder for attaching the indicator to the quill of a vertical milling machine for only $9.90 more.

1.3875" face diameter.
.078" contact point.
.374" stem. Anti-magnet type.
Dovetail allows the dial test indicator to be held by many accessories:
Test indicator holders, Zero Set, and Noga, Universal, or Hydraulic magnetic bases.


You may also be interested in our dial test indicator accessories.
Quantity Price Model Description Reads Graduation Travel

$100.50 MIT-513-402
0.0005" Dial Test Indicator (SALE - List $134.00 ) .0005" 0-15-0 0.03"

$156.60 MIT-513-403
0.0001" Dial Test Indicator .0001" 0-4-0 0.008"

$110.40 MIT-513-402ST
Mitutoyo 0.0005" Dial Test Ind w/ACC-IH22 quill holder (SALE ) .0005" 0-15-0 0.03"

$166.50 MIT-513-403ST
Mitutoyo 0.0001" Dial Test Ind w/ACC-IH22 quill holder .0001" 0-4-0 0.008"

Vernier Calipers with Fine Adjustment

Stainless steel vernier calipers with fine adjustment.
Hardened. Complete with case.
Measures inside, outside, and depth. Guaranteed accurate.
With satin chrome scale.

Choose our VME models for accuracy at a bargain price or Mitutoyo for the highest level of craftsmanship.
Quantity Price Model Description Capacity Reads Brand

$15.90 VER-610MC
6" VME Vernier Cal, Fine Adj, .001", 1/50mm (SALE- WAS 19.90) 6" 1/1000", 1/50mm VME

$90.75 MIT-532-119
6" Mitutoyo Vernier Cal, Fine Adj, .001", 1/50mm (SALE - List $121.00 ) 6" 1/1000", 1/50mm Mitutoyo

$27.50 VER-810MC
8" VME Vernier Cal, Fine Adj, .001", 1/50mm 8" 1/1000", 1/50mm VME

$124.20 MIT-532-120
8" Mitutoyo Vernier Cal, Fine Adj, .001", 1/50mm 8" 1/1000", 1/50mm Mitutoyo

$39.90 VER-1210MC
12" VME Vernier Cal, Fine Adj, .001", 1/50mm (SALE- WAS $49.90) 12" 1/1000", 1/50mm VME

$270.90 MIT-532-121
12" Mitutoyo Vernier Cal, Fine Adj, .001", 1/50mm 12" 1/1000", 1/50mm Mitutoyo

Vernier Calipers with Thumblock

The jaw can be moved only when spring loaded thumb clamp is depressed.
Fully hardened stainless steel construction.
Satin chrome finish. Micro-fine black graduations.
Direct reading for inside, outside and depth.
All measuring surfaces are precision ground and lapped.
Includes fitted case.

Choose our VME model for accuracy at a bargain price, our VIS model for a higher level of finish and durabitity, or Mitutoyo for the highest level of craftsmanship.
Quantity Price Model Description Capacity Reads Brand

$13.90 VER-600MC
6" VME Vernier Cal, Thumblock, .001", 1/50mm 6" 1/1000", 1/50mm VME

$29.50 VER-600M
6" VIS Vernier Cal, Thumblock, .001", 1/20mm 6" 1/1000", 1/20mm VIS / Poland

$83.25 MIT-531-128
6" Mitutoyo Vernier Cal, Thumblock, 1/50mm, .001" (SALE - List $111.00 ) 6" 1/50 mm, 1/1000" Mitutoyo

$117.90 MIT-531-114
8" Mitutoyo Vernier Cal, Thumblock, .001", 1/128" (limited quantity) 8" 1/1000", 1/128" Mitutoyo

$124.20 MIT-531-129
8" Mitutoyo Vernier Cal, Thumblock, 1/50mm, .001" 8" 1/50 mm, 1/1000" Mitutoyo

Small Hole Gage Sets

Set measures .125" to .5" (.125-.200, .200-.300, .300-.400, .400-.500) - 4 gages in a case.
Gaging surface on model GA-SM290, GA-SM290E and MIT-154-901 is a half ball with a flat bottom, fully hardened.
Gaging surface on models GA-SM290F is a full ball with a flat bottom, fully hardened .
Knurled knob at end of handle is used for size adjustment.
Hole size is obtained by measuring over the contact points with a micrometer.
Quantity Price Model Description Made in Ball Style

$7.50 GA-SM290E
Small Hole Gage Set, Half Ball (SALE - Was $11.90) China Half

$11.90 GA-SM290F
Small Hole Gage Set, Full Ball China Full

$24.90 GA-SM290
Small Hole Gage Set, Half Ball-Japan Japan Half

$86.25 MIT-154-901
Small Hole Gage Set, Mitutoyo (SALE - List $115.00 ) Japan Half

Mitutoyo Surplus Sale

High Quality Mitutoyo measuring instruments.
40% off list price
Limited to quantity in stock.
For more details please call or refer to Mitutoyo's online catalog at www.mitutoyo.com
If ordering by phone, you must give us the model number (ending with BB) to get the sale price.
Quantity Price Model Description List Price Description Specs

$216.90 MIT-106-102BB
MICRON MICROMETER NRS 351.00 Friction Thimble, non rotating spindle 0-1"/.0001"

$249.70 MIT-106-104BB
MICRON MICROMETER NRS 404.00 Friction Thimble, non rotating spindle 1-2"/.0001"

$120.50 MIT-112-177BB
POINT MICROMETER 195.00 Without Carbide Points A=15, L=.394" 0-1"/.001"

$164.40 MIT-112-190BB
POINT MICROMETER W/CAR 266.00 With Carbide Points A=15, L=.430" 1-2"/.001"

$127.90 MIT-112-238BB
POINT MICROMETER W/CAR 207.00 With Carbide Points A=30, L=.430", and Standard 1-2"/.001"

$166.20 MIT-123-128BB
DISC MICROMETER 269.00 Disc Diameter .79" with Standard 3-4"/.001"

$394.30 MIT-133-903BB
2-6 INSIDE MICROMETER SET 638.00 4 PIECE SET 2-6"

$104.40 MIT-141-102BB
INSIDE MICROMETER W/I.R. 169.00 Include 141-002 and 2 pcs rods 1-2"/.001"

$126.70 MIT-142-225BB
POINT MICROMETER W/DC 205.00 Without Carbide Points A=30, L=.430" 0-1"/.001"

$118.70 MIT-147-106BB
CAN SEAM MICROMETER 192.00 . 0-.5"/.001"

$33.60 MIT-148-112BB
MICROMETER HEAD 54.40 . 0-.5"/.001"

$36.60 MIT-148-502BB
MICROMETER HEAD 59.20 With Clamp Nut 0-.5"/.001"

$36.60 MIT-149-148BB
MICROMETER HEAD 59.20 . 0-.5"/.001"

$62.40 MIT-151-224BB
MICROMETER HEAD 101.00 . 0-25mm/.01mm

$135.30 MIT-159-212BB
1-2 COMBI MICROMETER 219.00 Friction Thimble 1-2"/.0001"

$148.30 MIT-159-215BB
4-5 COMBI MICROMETER . . 4-5"

$217.50 MIT-169-204BB
DISC MICROMETER 352.00 Disc Diameter .79" with Standard 1-2"/.001"

$103.20 MIT-177-184BB
SETTING RING GAGE, 1.0IN 167.00 . 1.0" (size)

$90.20 MIT-181-142BB
UNIV V-BLOCK 146.00 . .

$90.80 MIT-181-941BB
UNIV V-BLOCK 147.00 . .

$39.20 MIT-184-313BB
THICKNESS GAGE 63.45 Tapered Leaves 28 Leaves, 100 mm long