1-800-723-5359

Metalworking Tools and Supplies

Shop

Express Order

Model # Qty

Info

Contact

Account

Machine Accessories Sale

Drill Doctor Drill Bit Sharpeners

Sharpens High Speed Steel, Cobalt, or Carbide bits
Uses a diamond wheel (included) to sharpen standard 118 degree points, 135 degree split points, or even to grind split point bits from standard.
Includes case
These Drill bit tool sharpeners are made in the USA.
110 volt, 3 amp motor.
Quantity Price Model Description Capacity
Out of stock
$99.00 DOC-500X
Drill Doctor 1/2 in Drill Bit Sharpener (SALE - 1 Available - Was $148.00 ) 3/32"-1/2" bits

$188.00 DOC-750X
Drill Doctor 3/4 in Drill Bit Sharpener 3/32"-3/4" bits

Permanent Magnetic Chucks

Permanent magnets never lose their strength - always providing superior holding power.
Standard Pole Spacing. On/off switch. Completely sealed from dirt and liquids.
Rectangular chucks are equipped with one backrail and one endrail.
Quantity Price Model Description Size Shipping Weight

$109.00 MAG-470
Magnetic Chuck, 4" x 7" (SALE - Was $139.00) 4" x 7" 20 lbs

$127.00 MAG-510
Magnetic Chuck, 5" x 10" (SALE - Was $159.00) 5" x 10" 37 lbs

$239.00 MAG-612
Magnetic Chuck, 6" x 12" 6" x 12" 50 lbs

$299.00 MAG-618
Magnetic Chuck, 6" x 18" 6" x 18" 60 lbs

$180.00 MAG-06
Magnetic Chuck, 6" Round 6" 19 lbs

$240.00 MAG-08
Magnetic Chuck, 8" Round 8" 34 lbs

Single Slide Table

Used for milling, drilling, positioning, even microscope staging.
T-Slots are on 2-1/2" centers. 8" travel. 3-3/4" high. Weight is approximately 35 pounds.
Quantity Price Model Description

$71.60 CST-2539
Single Slide Table (SALE - WAS $89.50)

Horizontal/Vertical 5C Collet Index

Patented Single lever action - allows rapid one-handed indexing.
24 maskable indexing holes.
A ratchet device on the front of the spindle permits rapid rotation of the spindle nose.
Threaded spindle: 2 1/4"- 8. The spindle has a taper seat in the body frame.
Quantity Price Model Description

$189.00 MAC-HV
5C Collet Index, Horizontal/Vertical (SALE - WAS $279.00)

Square Angle Plates

Solid faces (no slots).
Precision Ground semi-steel, except 12" which is machined.
Accuracy: .002" over 6" run.

May have 1 rib or 2 ribs.
Usually sizes to 6" have 1 rib and 8" and larger have 2 ribs.
But please call about the number of ribs on a specific size if this is crucial to your application.
Quantity Price Model Description Size

$7.50 APS-10
1" x 1" x 1" Square Angle Plate 1" x 1" x 1"

$7.10 APS-20
2" x 2" x 2" Square Angle Plate (SALE - WAS $8.90) 2" x 2" x 2"

$10.25 APS-30
3" x 3" x 3" Square Angle Plate (SALE - WAS $12.80) 3" x 3" x 3"

$13.90 APS-40
4" x 4" x 4" Square Angle Plate (SALE - WAS $17.40) 4" x 4" x 4"

$20.80 APS-50
5" x 5" x 5" Square Angle Plate (SALE - WAS $26.00) 5" x 5" x 5"

$28.00 APS-60
6" x 6" x 6" Square Angle Plate (SALE - WAS $37.00 ) 6" x 6" x 6"

$57.60 APS-80
8" x 8" x 8" Square Angle Plate (SALE - WAS $77.00) 8" x 8" x 8"

$129.00 APS-100
10" x 10" x 10" Square Angle Plate 10" x 10" x 10"

$149.00 APS-120
12" x 12" x 12" Square Machined Angle Plate (SALE - WAS $220.00) 12" x 12" x 12"

Webbed End Slotted Angle Plates

These machinist angle plates are made from high quality seasoned castings.
Accurate to .002" over 5" run.
Webbed-end. Precision Ground and Parallel on the outside faces and ends.
Quantity Price Model Description "A" Length "B" 1st Angle "C" 2nd Angle

$10.90 AP-200
3 1/2 x 3 x 2-1/2 Web Angle Plate (SALE - WAS $12.90) 3 1/2" 3" 2 1/2"

$17.40 AP-201
4 1/2 x 3-1/2 x 3 Web Angle Plate 4 1/2" 3 1/2" 3"
Out of stock
$27.50 AP-202
6 x 5 x 4-1/2 Web Angle Plate 6" 5" 4 1/2"

$31.60 AP-203
7 x 5-1/2 x 4-1/2 Web Angle Plate 7" 5 1/2" 4 1/2"

$34.50 AP-204
8 x 6 x 5 Web Angle Plate (SALE - WAS $44.50) 8" 6" 5"

$53.20 AP-205
9 x 7 x 6 Web Angle Plate 9" 7" 6"

$52.00 AP-206
10 x 8 x 6 Web Angle Plate (SALE - WAS $71.70 ) 10" 8" 6"

$93.00 AP-207
12 x 9 x 8 Web Angle Plate 12" 9" 8"

Open End Slotted Angle Plates

Made from High Quality Seasoned Castings.
Accurate to .002" in 5".
Open-End, Precision Ground Square and Parallel on outer faces.
Inner faces are painted and not flat.
Quantity Price Model Description "A" Length "B" 1st Angle "C" 2nd Angle

$17.30 AP-301
4 1/2 x 3-1/2 x 3 Open Angle Plate (SALE - WAS $21.70) 4 1/2" 3 1/2" 3"

$32.40 AP-302
6 x 5 x 4-1/2 Open Angle Plate 6" 5" 4 1/2"

$38.00 AP-303
7 x 5-1/2 x 4-1/2 Open Angle Plate 7" 5 1/2" 4 1/2"

$37.80 AP-304
8 x 6 x 5 Open Angle Plate (SALE - WAS $49.90) 8" 6" 5"

$58.20 AP-305
9 x 7 x 6 Open Angle Plate (SALE - WAS $72.80) 9" 7" 6"

$67.70 AP-306
10 x 8 x 6 Open Angle Plate (SALE - WAS $89.00) 10" 8" 6"

$91.20 AP-307
12 x 9 x 8 Open Angle Plate (SALE - WAS $114.00) 12" 9" 8"

Universal Right Angle Irons

Universal Right Angle Irons are ideal wherever square surfaces are required for checking or layout work.
Made of the finest quality, close grained semi-steel castings.
Stress is relieved against distortion by annealing after natural seasoning.
Square and parallel to within .002" over 6" run.
Quantity Price Model Description Width (A) Depth (B) Height (C)

$21.50 UR1M
3 3/4" Universal Right Angle Iron (SALE - WAS $29.80 ) 3 3/4" 4" 5"
Out of stock
$33.00 UR2M
4" Universal Right Angle Iron 4" 4" 6"

$47.80 UR4M
4 1/2" Universal Right Angle Iron 4 1/2" 5" 8"

$67.50 UR5M
5" Universal Right Angle Iron (SALE - WAS $89.60 ) 5" 8" 12"

$59.80 UR6M
5 1/2" Universal Right Angle Iron (SALE - WAS $82.30 ) 5 1/2" 7" 10"
Out of stock
$79.30 UR7M
5 1/2" Universal Right Angle Iron 5 1/2" 8" 10"
Out of stock
$68.50 UR8M
6" Universal Right Angle Iron 6" 6" 8"

5C Fixture Mounts

Used in place of face plate fixtures.
Soft head is easily machined.
Heat-treated tool steel shank.
Quick mounting and dismounting.
1" Face Depth.
Quantity Price Model Description Head Diameter

$28.00 5CFM-4
5C Fixture Mount, 4" Flange (SALE - WAS $39.90 ) 4"

$31.00 5CFM-5
5C Fixture Mount, 5" Flange (SALE - WAS $48.80 ) 5"

$34.00 5CFM-6
5C Fixture Mount, 6" Flange (SALE - WAS $51.80 ) 6"

VME Live Centers

Made of finest heat treated steel, with case-hardened housing. Built-in washer to protect bearings from grit and dust.
Centers have 60 degree point, and concentricity of +/- 0.0004".

Quantity Price Model Description Size

$21.00 LC-11
1MT Medium Duty VME Live Center (SALE - WAS $28.00 ) 1 Morse Taper

$26.95 LC-21
2MT Medium Duty VME Live Center 2 Morse Taper

$32.50 LC-31
3MT Medium Duty VME Live Center 3 Morse Taper

$43.00 LC-41
4MT Medium Duty VME Live Center 4 Morse Taper

$70.20 LC-51
5MT Medium Duty VME Live Center 5 Morse Taper

$108.00 LC-61
6MT Medium Duty VME Live Center (SALE - WAS $185.00 ) 6 Morse Taper