1-800-723-5359

Metalworking Tools and Supplies

Shop

Express Order

Model # Qty

Info

Contact

Account

Vises and Clamping Sale

K-Type Milling Machine Vise

This Milling machine vise for sale comes with a swivel base, graduated in 180 degrees.
Replaceable jaws.
Large acme drive screw.
Good quality medium duty vise.
Quantity Price Model Description Jaw Width Jaw Height Total Height Opening w/ Jaws Opening w/o Jaws

$79.00 VS-K4
4" K Type Milling Machine Vise (SALE - WAS $97.50) 4" 1 3/8" 4 1/4" 2 1/4" 3"

Tilt and Swivel Milling Machine Vise

The TSV-4 and the TSV-6 tilt 90° and swivel 360°. These milling machine vises are graduated for easy reading of angles
Note that the VS-TW4 is a 3-way vise. The third axis can rotate 45° left or right from center.
Quantity Price Model Description Jaw Width Jaws Open to Jaw Depth Total Height Weight

$179.00 VS-TS4
4" Tilt and Swivel Milling Vise 4" 3" 1.4" 6.5" 44 lbs

$219.00 VS-TS6
6" Tilt and Swivel Miling Vise (SALE - WAS $289.00 ) 6" 5" 2" 8" 97 lbs

$365.00 VS-TW4
4" Three Way Milling Vise 4" 2.75" 1.5" 5.875" 71 lbs

Drill Press Vises

These drill press vises feature high tensile cast iron and removable steel jaws.
VS-P150, 1-1/2" vise is machined on two sides as well as the bottom, allowing it to be used laying on the side surfaces.

2-1/2" and 4" vises have a painted finish on the sides and cannot be used laying on its side.
One jaw is grooved vertically and horizontally to hold round parts.
Quantity Price Model Description Jaw Width Jaw Depth Jaws Open to Length Overall Height Overall

$17.60 VS-P150
1 1/2" Drill Press Vise 1-1/2" 7/8" 1 1/2" 4 1/8" 1 3/4"
Out of stock
$25.20 VS-P250
2 1/2" Drill Press Vise 2-1/2" 1 1/2" 2 1/2" 6 3/4" 2 1/2"

$27.50 VS-P400
4 3/8" Drill Press Vise (SALE - WAS $37.50) 4-3/8" 1 5/8" 3 7/8" 8 1/4" 3"

Two Piece Milling Vise

A two piece milling machine vise is designed to allow the use of the full length of the mill table.
A large milling vise holds extra-long work rigidly and accurately.
Body is quality casting. All working and mounting surfaces are precision machined.
Jaws are hardened and precision ground.
Includes handle.
Quantity Price Model Description Jaw Width Jaw Depth Jaws Open to Weight

$139.00 VS-TP6
6" Two Piece Milling Vise 6" 3" 11/16" 29 lbs

$109.00 VS-TP8A
8" Two Piece Milling Vise- 3-1/4" jaw height (SALE - WAS $149.00) 8" 3-1/4" 13/16" 53 lbs

$159.00 VS-TP8
8" Two Piece Milling Vise- 3-7/8" jaw height 8" 3-7/8" 13/16" 53 lbs

Toolmaker's Screwless Vise

All surface hardened and precision-ground to +/- .0002".
Base and stationary jaw are one solid piece.
Up to 400 lbs. pressure at 45° downward angle keeps work rigid.
Quick adjustment is made by pulling pin and pushing sliding jaw forward, then tightening with an Allen wrench.
Quantity Price Model Description Width Length Height Opens Jaw Depth

$56.00 VS-SLV2A
2" Toolmakers Screwless Vise 2" 5-1/2" 2 " 2-1/2" 1"

$65.80 VS-SLV1
2 7/8" Toolmakers Screwless Vise (SALE - WAS $87.50) 2-7/8" 7 1/2" 2 5/8" 4" 1 3/8"

$129.00 VS-SLV3
3 7/8" Toolmakers Screwless Vise 3-7/8" 9 5/8" 3 1/2" 4 3/4" 1 3/4"

T-Nut and Stud Sets

T-Nut and Stud Sets.
Each set consists of these parts:
4 studs of each length: 3", 4", 5", 6", 7", 8"
4 T-nuts
4 flanged nuts
4 coupling nuts
Sturdy holder (May be a vertical rack or a wood base, depending on model ordered - do not go by the photo).
Quantity Price Model Description Table Slot Stud Size

$25.60 TS-437
7/16" T-Nut and Stud Set, 3/8-16 Thread (SALE - WAS $32.00) 7/16" 3/8-16

$25.60 TS-500
1/2" T-Nut and Stud Set, 3/8-16 Thread (SALE - WAS $32.00) 1/2" 3/8-16

$25.60 TS-560
9/16" T-Nut and Stud Set, 3/8-16 Thread (SALE - WAS $32.00) 9/16" 3/8-16

$42.00 TS-562
9/16" T-Nut and Stud Set, 1/2-13 Thread 9/16" 1/2-13

$42.00 TS-625
5/8" T-Nut and Stud Set, 1/2-13 Thread 5/8" 1/2-13

$42.00 TS-680
11/16" T-Nut and Stud Set, 1/2-13 Thread 11/16" 1/2-13

$42.40 TS-687
11/16" T-Nut and Stud Set, 5/8-11 Thread (SALE - WAS $49.00) 11/16" 5/8-11

$42.40 TS-750
3/4" T-Nut and Stud Set, 5/8-11 Thread (SALE - WAS $53.00) 3/4" 5/8-11

$46.40 TS-800
13/16" T-Nut and Stud Set, 5/8-11 Thread (SALE - WAS $58.00) 13/16" 5/8-11

Parallel Clamps

Toolmakers pattern. Hardened steel toolmakers clamps. These steel machinist's parallel clamps are equipped with a spring screw clip.
Quantity Price Model Description Jaw Opening Jaw Length

$3.70 CLP-401
1 1/4" Parallel Clamp (SALE - WAS $4.60 ) 1 1/4" 2"

$4.50 CLP-402
1 3/4" Parallel Clamp (SALE - WAS $5.60 ) 1 3/4" 2 1/2"

$5.90 CLP-403
2 1/4" Parallel Clamp (SALE - WAS $7.40 ) 2 1/4" 3"

$7.50 CLP-404
2 3/4" Parallel Clamp (SALE - WAS $9.40 ) 2 3/4" 4"

$14.50 CLP-405
3 1/2" Parallel Clamp 3 1/2" 5"

$22.50 CLP-406
4 1/2" Parallel Clamp 4 1/2" 6"

Magnetic Quick Clamps

Magnetic clamps enable fast and accurate holding of ferrous metals for welding and assembly jobs.
Will hold sheet and tube at angles of 180°, 90°, 75°, 60°, 45°, 30°.
Appx. 4" long x 2 1/2" high.
Quantity Price Model Description Dimensions

$5.50 MQC-01
Magnetic Quick Clamp, small (SALE - WAS $6.95 ) 2 1/2" x 4"

$7.00 MQC-02
Magnetic Quick Clamp, arrow shape (SALE - WAS $8.95 ) 4" x 6"