1" Carbide Insert End Mill - 3/4 Sh (uses TPG-22 series inserts)
Model #: IEM-1000-W3
- Cutting Diameter: 1"
- Number of Inserts: 2
- I.C.: 1/4"
- Shank: 3/4"
- Positive rake, 90 Degree right hand cut.
Adaptable for N.C. machining.
Cutting rake angle 0 Degree;
Axial rake angle 0 Degree;
Setting angle 90 Degree.
Each end mill includes 1 set of screws.
These end mills typically use TPU, TPG, or TPC-32YR triangular inserts with the appropriate I.C. dimension.
Inserts are NOT included with the end mill.