Shop

Express Order

Model # Qty

Info

Contact

Account

Depth Measuring Tools

VME Dial Depth Gage

Accurately measure depth of holes, slots, and grooves.
0 to 6" range.
2-1/2" hardened and ground base.
Reads .001". With fitted case.
Quantity Price Model Description

$59.90 VME-DDG25
0-6" VME Dial Depth Gage

Fowler Dial Depth Gage

0 to 22" Range.
Accurately measure depth of holes, slots, and grooves.
3-1/2" Hardened and ground base.
Reads .001". With fitted case.
Quantity Price Model Description

$238.00 FOW-52-125-006
0-22" Fowler Dial Depth Gage

Teclock Dial Depth Gage

Teclock Dial Depth Gage
Premium Japanese model.
Accurately measure depth of holes, slots, and grooves.
0.001"- 8" range.
4" hardened and ground base.
Reads .001". With fitted case.

Last of our "New Old Stock" Teclock Depth Gages. These have been with us for a while, but when they're gone, they're gone for good. Less than 10 left.
Quantity Price Model Description

$127.00 TEC-DI202D
Depth Gage, Teclock (Japan) DI202D, .001"- 8"

Fowler Xtra-Value Depth Gage

Fowler Xtra-Value Depth Gage.

Spring-loaded and 'hold measurement' button.
Travel Length: 1"
Measurement Range: 0-16" (Rods screw together.)
Resolution: .0005"/ .01mm, or fractions in 1/64" increments.
Supplied in a fitted case.
Quantity Price Model Description

$80.30 FOW-54-225-555
Fowler Xtra-Value Depth Gage

Depth Micrometers

Graduation .001". Satin chrome finish.
Ratchet included for consistent measurements. Comes in fitted case.
Quantity Price Model Description Cap. Base Size Rods Made by

$51.90 VME-DM4
0-4" VME Depth Micrometer, 1238-0010 0-4" 4" 4 VME

$191.70 MIT-129-131
0-4" Mitutoyo Depth Micrometer, 1258-0020 0-4" 4" 4 Mitutoyo

$69.80 VME-DM6
0-6" VME Depth Micrometer, 1238-0020 0-6" 4" 6 VME

$224.10 MIT-129-132
0-6" Mitutoyo Depth Micrometer, 1258-0025 0-6" 4" 6 Mitutoyo
Out of stock
$75.00 NSK-TS06M
0-75mm NSK Depth Micrometer 0-75mm 2 1/2" 3 NSK

General Depth and Angle Gage

6 x 1/4" stainless steel rule with 2 1/2" wide hardened and ground steel base.
Spring tension nut for easy depth or angle mearsurements.
30°, 40°, and 60° settings on both sides.

Made by General Tools.
Quantity Price Model Description Reads
Out of stock
$18.30 GEN-444
Depth and Angle Gage, General, 6800-1210 1/32, 1/64"

Protractor and Depth Gage

Graduated from 0° to 180° in opposite directions.
Narrow 6 x 1/4" depth gage rule is graduated in 32nds and 64ths.
Spring tension nut secures rule to depth and angle desired.
Made of stainless steel.

Made by General Tools.
Quantity Price Model Description

$21.90 GEN-19
General Protractor and Depth Gage, Steel, 6800-1205

Depth Base Attachments for Calipers

Turns most dial, vernier, or electronic calipers into a depth measuring device.
Steel base is precision ground.

Made in the USA by Accurate Manufactured Products Group.

Quantity Price Model Description Width Fits Calipers

$40.30 AA-9225
3" Caliper Depth Base Attachment, AMPG 3" 4", 6", 8"

$41.80 AA-9226
4" Caliper Depth Base Attachment, AMPG 4" 4", 6", 8"

$47.30 AA-9227
5" Caliper Depth Base Attachment, AMPG 5" 12"

Depth Base Attachment for Dial Indicators

Turns any AGD dial indicator with a 3/8" stem into a depth measuring device.
Steel base is precision ground flat and parallel on both top and bottom.
Set screw in base holds the indicator in place.
Black Oxide coated.

Made by Accurate Manufacturing.
Quantity Price Model Description Width

$29.40 AA-9228
2-1/2" Indicator Depth Base Attachment, AMPG 2-1/2"
Out of stock
$34.00 AA-9229
4" Indicator Depth Base Attachment, AMPG 4"