Shop

Express Order

Model # Qty

Info

Contact

Account

HS Hand Taps, NC and NF

HS Fractional Plug Taps

Fractional Plug taps. National Coarse and National Fine. These high speed steel taps are ground thread.

Basic tap types:
Taper tap: 5-6 lead threads ground. The easiest tap for starting to thread a hole.
Plug tap: 3-4 lead threads ground. The most common tap: a "middle ground" tap for threading.
Bottoming tap: 1-2 lead threads ground. Used for continuing to thread a blind hole close to the bottom of the hole. It's difficult to start threading a hole with this tap.
Spiral Point tap: A tap with a chisled point that pushes metal chips ahead of the forming threads.
Extremely useful for tapping through-holes (ie holes that extend through the work.) Often machine-driven.
Spiral Point taps are not recommended for use in blind holes: the accumulation of chips can tend to bind and break these taps more easily than others.

Recommended drill sizes are for approximately 75% thread.

Follow this link to see the corresponding Dies for these Taps.

Follow this link to explore our complete offering of taps, dies, and other threading tools.
Quantity Price Model Description Size Drill Size

$5.20 TAP-0-80
#0-80 HS Plug Tap 0300-0010 0-80 3/64"

$5.20 TAP-1-64
#1-64 HS Plug Tap 0300-0026 1-64 #54

$5.20 TAP-1-72
#1-72 HS Plug Tap 0300-0041 1-72 #53

$4.50 TAP-2-56
#2-56 HS Plug Tap 0300-0056 2-56 #51

$4.50 TAP-2-64
#2-64 HS Plug Tap 0300-0071 2-64 #50

$3.50 TAP-3-48
#3-48 HS Plug Tap 0300-0086 3-48 5/64"

$3.50 TAP-3-56
#3-56 HS Plug Tap 0300-0101 3-56 #46

$2.90 TAP-4-36
#4-36 HS Plug Tap 0300-0107 4-36 #44

$2.90 TAP-4-40
#4-40 HS Plug Tap 0300-0116 4-40 #43

$2.90 TAP-4-48
#4-48 HS Plug Tap 0300-0131 4-48 #42

$2.90 TAP-5-40
#5-40 HS Plug Tap 0300-0146 5-40 #39

$2.90 TAP-5-44
#5-44 HS Plug Tap 0300-0161 5-44 #37

$2.30 TAP-6-32
#6-32 HS Plug Tap 0300-0176 6-32 #36

$2.30 TAP-6-40
#6-40 HS Plug Tap 0300-0191 6-40 #33

$2.30 TAP-8-32
#8-32 HS Plug Tap 0300-0206 8-32 #29

$2.30 TAP-8-36
#8-36 HS Plug Tap 0300-0221 8-36 #29

$2.40 TAP-10-24
#10-24 HS Plug Tap 0300-0236 10-24 #25

$2.40 TAP-10-32
#10-32 HS Plug Tap 0300-0251 10-32 #21

$2.50 TAP-12-24
#12-24 HS Plug Tap 0300-0266 12-24 #17

$2.50 TAP-12-28
#12-28 HS Plug Tap 0300-0281 12-28 #15

$2.45 TAP-1/4-20
1/4"-20 HS Plug Tap 0329-0011 1/4-20 #7

$2.45 TAP-1/4-28
1/4"-28 HS Plug Tap 0329-0026 1/4-28 #3

$2.90 TAP-5/16-18
5/16"-18 HS Plug Tap 0329-0041 5/16-18 F

$2.90 TAP-5/16-24
5/16"-24 HS Plug Tap 0329-0056 5/16-24 I

$3.30 TAP-3/8-16
3/8"-16 HS Plug Tap 0329-0071 3/8-16 5/16"

$3.30 TAP-3/8-24
3/8"-24 HS Plug Tap 0329-0086 3/8-24 Q

$5.50 TAP-7/16-14
7/16"-14 HS Plug Tap 0329-0101 7/16-14 U

$5.50 TAP-7/16-20
7/16"-20 HS Plug Tap 0329-0116 7/16-20 W

$6.10 TAP-1/2-13
1/2"-13 HS Plug Tap 0329-0131 1/2-13 27/64"

$6.10 TAP-1/2-20
1/2"-20 HS Plug Tap 0329-0146 1/2-20 29/64"

$9.50 TAP-9/16-12
9/16"-12 HS Plug Tap 0330-0011 9/16-12 31/64"

$9.50 TAP-9/16-18
9/16"-18 HS Plug Tap 0330-0026 9/16-18 33/64"

$11.00 TAP-5/8-11
5/8"-11 HS Plug Tap 0330-0041 5/8-11 17/32"

$11.00 TAP-5/8-18
5/8"-18 HS Plug Tap 0330-0056 5/8-18 37/64"

$16.00 TAP-3/4-10
3/4"-10 HS Plug Tap 0330-0071 3/4-10 21/32"

$16.00 TAP-3/4-16
3/4"-16 HS Plug Tap 0330-0086 3/4-16 11/16"

$21.50 TAP-7/8-9
7/8"-9 HS Plug Tap 0331-0011 7/8-9 49/64"

$21.50 TAP-7/8-14
7/8"-14 HS Plug Tap 0331-0026 7/8-14 13/16"

$29.50 TAP-1-8
1"-8 HS Plug Tap 0331-0041 1"-8 7/8"

$29.50 TAP-1-12
1"-12 HS Plug Tap 0331-0056 1"-12 59/64"

$29.50 TAP-1-14
1"-14 HS Plug Tap 0331-0071 1"-14 15/16"

$46.00 TAP-1-1/8-7
1-1/8"-7 HS Plug Tap 0331-0086 1-1/8-7 63/64"

$46.00 TAP-1-1/8-12
1-1/8"-12 HS Plug Tap 0331-0101 1-1/8-12 1-3/64"

$68.00 TAP-1-1/4-7
1-1/4"-7 HS Plug Tap 0331-0116 1-1/4-7 1-7/64"

$68.00 TAP-1-1/4-12
1-1/4"-12 HS Plug Tap 0331-0131 1-1/4-12 1-11/64"

$76.00 TAP-1-3/8-6
1-3/8"-6 HS Plug Tap 0331-0146 1-3/8-6 1-7/32"

$76.00 TAP-1-3/8-12
1-3/8"-12 HS Plug Tap 0331-0161 1-3/8-12 1-19/64"

$87.00 TAP-1-1/2-6
1-1/2"-6 HS Plug Tap 0331-0176 1-1/2-6 1-11/32"

$87.00 TAP-1-1/2-12
1-1/2"-12 HS Plug Tap 0331-0191 1-1/2-12 1-27/64"

USA High Speed Steel Plug Taps

High Speed Steel Plug Taps.
Made in USA .
National Coarse and National Fine sizes.

Follow this link to see the corresponding Dies for these Taps.

Follow this link to explore our complete offering of taps, dies, and other threading tools.
Quantity Price Model Description Size

$10.20 TAPR-2-56
#2-56 USA HS GH2 Plug Tap, 0452-0025 2-56

$6.45 TAPR-4-40
#4-40 USA HS GH2 Plug Tap 0452-0095 4-40

$6.45 TAPR-5-40
#5-40 USA HS GH2 Plug Tap 0452-0125 5-40

$5.00 TAPR-6-32
#6-32 USA HS GH3 Plug Tap 0452-0160 6-32

$5.15 TAPR-8-32
#8-32 USA HS GH3 Plug Tap 0452-0190 8-32

$5.25 TAPR-10-24
#10-24 USA HS GH3 Plug Tap 0452-0220 10-24

$5.25 TAPR-10-32
#10-32 USA HS GH3 Plug Tap 0452-0235 10-32

$5.60 TAPR-1/4-20
1/4"-20 USA HS GH3 Plug Tap 0452-0310 1/4-20

$5.60 TAPR-1/4-28
1/4"-28 USA HS GH3 Plug Tap 0452-0325 1/4-28

$6.95 TAPR-5/16-18
5/16"-18 USA HS GH3 Plug Tap 0452-0340 5/16-18

$6.95 TAPR-5/16-24
5/16"-24 USA HS GH3 Plug Tap 0452-0355 5/16-24

$7.90 TAPR-3/8-16
3/8"-16 USA HS GH3 Plug Tap 0452-0370 3/8-16

$7.90 TAPR-3/8-24
3/8"-24 USA HS GH3 Plug Tap 0452-0385 3/8-24

$13.45 TAPR-7/16-14
7/16"-14 USA HS GH3 Plug Tap 0452-0400 7/16-14

$13.45 TAPR-7/16-20
7/16"-20 USA HS GH3 Plug Tap 0452-0415 7/16-20

$14.10 TAPR-1/2-13
1/2"-13 USA HS GH3 Plug Tap 0452-0430 1/2-13

$14.10 TAPR-1/2-20
1/2"-20 USA HS GH3 Plug Tap 0452-0445 1/2-20

$28.40 TAPR-5/8-11
5/8"-11 USA HS GH3 Plug Tap 0452-0490 5/8-11

$28.40 TAPR-5/8-18
5/8"-18 USA HS GH3 Plug Tap 0452-0500 5/8-18

$39.75 TAPR-3/4-10
3/4"-10 USA HS GH3 Plug Tap 0452-0515 3/4-10

$39.75 TAPR-3/4-16
3/4"-16 USA HS GH3 Plug Tap 0452-0530 3/4-16

$55.50 TAPR-7/8-9
7/8"-9 USA HS GH4 Plug Tap 0452-0545 7/8-9

HS Fractional Taper Taps

Fractional Taper taps. National Coarse and National Fine. High Speed Hand Taps. Ground Thread.

Basic tap types:
Taper tap: 5-6 lead threads ground. The easiest tap for starting to thread a hole.
Plug tap: 3-4 lead threads ground. The most common tap: a "middle ground" tap for threading.
Bottoming tap: 1-2 lead threads ground. Used for continuing to thread a blind hole close to the bottom of the hole. It's difficult to start threading a hole with this tap.
Spiral Point tap: A tap with a chisled point that pushes metal chips ahead of the forming threads.
Extremely useful for tapping through-holes (ie holes that extend through the work.) Often machine-driven.
Spiral Point taps are not recommended for use in blind holes: the accumulation of chips can tend to bind and break these taps more easily than others.

Recommended drill sizes are for approximately 75% thread.

Follow this link to see the corresponding Dies for these Taps.

Follow this link to explore our complete offering of taps, dies, and other threading tools.
Quantity Price Model Description Size Drill Size

$5.20 TAT-0-80
#0-80 HS Taper Tap 0300-0005 0-80 3/64"

$5.20 TAT-1-64
#1-64 HS Taper Tap 0300-0027 1-64 #54

$5.20 TAT-1-72
#1-72 HS Taper Tap 0300-0036 1-72 #53

$4.50 TAT-2-56
#2-56 HS Taper Tap 0300-0051 2-56 #51

$4.50 TAT-2-64
#2-64 HS Taper Tap 0300-0066 2-64 #50

$3.50 TAT-3-48
#3-48 HS Taper Tap 0300-0081 3-48 5/64"

$3.50 TAT-3-56
#3-56 HS Taper Tap 0300-0096 3-56 #46

$2.90 TAT-4-36
#4-36 HS Taper Tap 0300-0108 4-36 #44

$2.90 TAT-4-40
#4-40 HS Taper Tap 0300-0111 4-40 #43

$2.90 TAT-4-48
#4-48 HS Taper Tap 0300-0126 4-48 #42

$2.90 TAT-5-40
#5-40 HS Taper Tap 0300-0141 5-40 #39

$2.90 TAT-5-44
#5-44 HS Taper Tap 0300-0156 5-44 #37

$2.30 TAT-6-32
#6-32 HS Taper Tap 0300-0171 6-32 #36

$2.30 TAT-6-40
#6-40 HS Taper Tap 0300-0186 6-40 #33

$2.30 TAT-8-32
#8-32 HS Taper Tap 0300-0201 8-32 #29

$2.30 TAT-8-36
#8-36 HS Taper Tap 0300-0216 8-36 #29

$2.40 TAT-10-24
#10-24 HS Taper Tap 0300-0231 10-24 #25

$2.40 TAT-10-32
#10-32 HS Taper Tap 0300-0246 10-32 #21

$2.50 TAT-12-24
#12-24 HS Taper Tap 0300-0261 12-24 #17

$2.50 TAT-12-28
#12-28 HS Taper Tap 0300-0276 12-28 #15

$2.45 TAT-1/4-20
1/4"-20 HS Taper Tap 0329-0006 1/4-20 #7

$2.45 TAT-1/4-28
1/4"-28 HS Taper Tap 0329-0021 1/4-28 #3

$2.90 TAT-5/16-18
5/16"-18 HS Taper Tap 0329-0036 5/16-18 F

$2.90 TAT-5/16-24
5/16"-24 HS Taper Tap 0329-0051 5/16-24 I

$3.30 TAT-3/8-16
3/8"-16 HS Taper Tap 0329-0066 3/8-16 5/16"

$3.30 TAT-3/8-24
3/8"-24 HS Taper Tap 0329-0081 3/8-24 Q

$5.50 TAT-7/16-14
7/16"-14 HS Taper Tap 0329-0096 7/16-14 U

$5.50 TAT-7/16-20
7/16"-20 HS Taper Tap 0329-0111 7/16-20 W

$6.10 TAT-1/2-13
1/2"-13 HS Taper Tap 0329-0126 1/2-13 27/64"

$6.10 TAT-1/2-20
1/2"-20 HS Taper Tap 0329-0141 1/2-20 29/64"

$9.50 TAT-9/16-12
9/16"-12 HS Taper Tap 0330-0006 9/16-12 31/64"

$9.50 TAT-9/16-18
9/16"-18 HS Taper Tap 0330-0021 9/16-18 33/64"

$11.00 TAT-5/8-11
5/8"-11 HS Taper Tap 0330-0036 5/8-11 17/32"

$11.00 TAT-5/8-18
5/8"-18 HS Taper Tap 0330-0051 5/8-18 37/64"

$16.00 TAT-3/4-10
3/4"-10 HS Taper Tap 0330-0066 3/4-10 21/32"

$16.00 TAT-3/4-16
3/4"-16 HS Taper Tap 0330-0081 3/4-16 11/16"

$21.50 TAT-7/8-9
7/8"-9 HS Taper Tap 0331-0006 7/8-9 49/64"

$21.50 TAT-7/8-14
7/8"-14 HS Taper Tap 0331-0021 7/8-14 13/16"

$29.50 TAT-1-8
1"-8 HS Taper Tap 0331-0036 1"-8 7/8"

$29.50 TAT-1-12
1"-12 HS Taper Tap 0331-0051 1"-12 59/64"

$29.50 TAT-1-14
1"-14 HS Taper Tap 0331-0066 1"-14 15/16"

$46.00 TAT-1-1/8-7
1-1/8"-7 HS Taper Tap 0331-0081 1 1/8-7 63/64"

$46.00 TAT-1-1/8-12
1-1/8"-12 HS Taper Tap 0331-0096 1 1/8-12 1-3/64"

$61.00 TAT-1-1/4-7
1-1/4"-7 HS Taper Tap 0331-0111 1 1/4-7 1-7/64"

$61.00 TAT-1-1/4-12
1-1/4"-12 HS Taper Tap 0331-0126 1 1/4-12 1-11/64"

$76.00 TAT-1-3/8-6
1-3/8"-6 HS Taper Tap 0331-0141 1 3/8-6 1-7/32"

$76.00 TAT-1-3/8-12
1-3/8"-12 HS Taper Tap 0331-0156 1 3/8-12 1-19/64"

$87.00 TAT-1-1/2-6
1-1/2"-6 HS Taper Tap 0331-0171 1 1/2-6 1-11/32"

$87.00 TAT-1-1/2-12
1-1/2"-12 HS Taper Tap 0331-0186 1 1/2-12 1-27/64"

HS Fractional Bottoming Taps

Fractional Bottoming taps. National Coarse and National Fine. High Speed Steel Taps. Ground Thread.

Please note that not all bottoming taps are flattened at the end.
Some manufacturers leave a point that you may have to grind off if going very close to the bottom of a hole.

Basic tap types:
Taper tap: 5-6 lead threads ground. The easiest tap for starting to thread a hole.
Plug tap: 3-4 lead threads ground. The most common tap: a "middle ground" tap for threading.
Bottoming tap: 1-2 lead threads ground. Used for continuing to thread a blind hole close to the bottom of the hole. It's difficult to start threading a hole with this tap.
Bottoming taps are not necessarily flat on the bottom - they sometimes have a 60 degree tapered point from the manufacturing process.
Spiral Point tap: A tap with a chisled point that pushes metal chips ahead of the forming threads.
Extremely useful for tapping through-holes (ie holes that extend through the work.) Often machine-driven.
Spiral Point taps are not recommended for use in blind holes: the accumulation of chips can tend to bind and break these taps more easily than others.

Recommended drill sizes are for approximately 75% thread.

Follow this link to see the corresponding Dies for these Taps.

Follow this link to explore our complete offering of taps, dies, and other threading tools.
Quantity Price Model Description Size Drill Size

$5.20 TAB-0-80
#0-80 HS Bottoming Tap 0300-0015 0-80 3/64"

$5.20 TAB-1-64
#1-64 HS Bottoming Tap 0300-0030 1-64 #54

$5.20 TAB-1-72
#1-72 HS Bottoming Tap 0300-0046 1-72 #53

$4.50 TAB-2-56
#2-56 HS Bottoming Tap 0300-0061 2-56 #51

$4.50 TAB-2-64
#2-64 HS Bottoming Tap 0300-0076 2-64 #50

$3.50 TAB-3-48
#3-48 HS Bottoming Tap 0300-0091 3-48 5/64"

$3.50 TAB-3-56
#3-56 HS Bottoming Tap 0300-0106 3-56 #46

$2.90 TAB-4-36
#4-36 HS Bottoming Tap 0300-0109 4-36 #44

$2.90 TAB-4-40
#4-40 HS Bottoming Tap 0300-0121 4-40 #43

$2.90 TAB-4-48
#4-48 HS Bottoming Tap 0300-0136 4-48 #42

$2.90 TAB-5-40
#5-40 HS Bottoming Tap 0300-0151 5-40 #39

$2.90 TAB-5-44
#5-44 HS Bottoming Tap 0300-0166 5-44 #37

$2.30 TAB-6-32
#6-32 HS Bottoming Tap 0300-0181 6-32 #36

$2.30 TAB-6-40
#6-40 HS Bottoming Tap 0300-0196 6-40 #33

$2.30 TAB-8-32
#8-32 HS Bottoming Tap 0300-0211 8-32 #29

$2.30 TAB-8-36
#8-36 HS Bottoming Tap 0300-0226 8-36 #29

$2.40 TAB-10-24
#10-24 HS Bottoming Tap 0300-0241 10-24 #25

$2.40 TAB-10-32
#10-32 HS Bottoming Tap 0300-0256 10-32 #21

$2.50 TAB-12-24
#12-24 HS Bottoming Tap 0300-0271 12-24 #17

$2.50 TAB-12-28
#12-28 HS Bottoming Tap 0300-0286 12-28 #15

$2.45 TAB-1/4-20
1/4"-20 HS Bottoming Tap 0329-0016 1/4-20 #7

$2.45 TAB-1/4-28
1/4"-28 HS Bottoming Tap 0329-0031 1/4-28 #3

$2.90 TAB-5/16-18
5/16"-18 HS Bottoming Tap 0329-0046 5/16-18 F

$2.90 TAB-5/16-24
5/16"-24 HS Bottoming Tap 0329-0061 5/16-24 I

$3.30 TAB-3/8-16
3/8"-16 HS Bottoming Tap 0329-0076 3/8-16 5/16"

$3.30 TAB-3/8-24
3/8"-24 HS Bottoming Tap 0329-0091 3/8-24 Q

$5.50 TAB-7/16-14
7/16"-14 HS Bottoming Tap 0329-0106 7/16-14 U

$5.50 TAB-7/16-20
7/16"-20 HS Bottoming Tap 0329-0121 7/16-20 W

$6.10 TAB-1/2-13
1/2"-13 HS Bottoming Tap 0329-0136 1/2-13 27/64"

$6.10 TAB-1/2-20
1/2"-20 HS Bottoming Tap 0329-0151 1/2-20 29/64"

$9.50 TAB-9/16-12
9/16"-12 HS Bottoming Tap 0330-0016 9/16-12 31/64"

$9.50 TAB-9/16-18
9/16"-18 HS Bottoming Tap 0330-0031 9/16-18 33/64"

$11.00 TAB-5/8-11
5/8"-11 HS Bottoming Tap 0330-0046 5/8-11 17/32"

$11.00 TAB-5/8-18
5/8"-18 HS Bottoming Tap 0330-0061 5/8-18 37/64"

$16.00 TAB-3/4-10
3/4"-10 HS Bottoming Tap 0330-0076 3/4-10 21/32"

$16.00 TAB-3/4-16
3/4"-16 HS Bottoming Tap 0330-0091 3/4-16 11/16"

$21.50 TAB-7/8-9
7/8"-9 HS Bottoming Tap 0331-0016 7/8-9 49/64"

$21.50 TAB-7/8-14
7/8"-14 HS Bottoming Tap 0331-0031 7/8-14 13/16"

$29.50 TAB-1-8
1"-8 HS Bottoming Tap 0331-0046 1"-8 7/8"

$29.50 TAB-1-12
1"-12 HS Bottoming Tap 0331-0061 1"-12 59/64"

$29.50 TAB-1-14
1"-14 HS Bottoming Tap 0331-0076 1"-14 15/16"

$46.00 TAB-1-1/8-7
1-1/8"-7 HS Bottoming Tap 0331-0091 1 1/8-7 63/64"

$46.00 TAB-1-1/8-12
1-1/8"-12 HS Bottoming Tap 0331-0106 1 1/8-12 1-3/64"

$61.00 TAB-1-1/4-7
1-1/4"-7 HS Bottoming Tap 0331-0121 1 1/4-7 1-7/64"

$61.00 TAB-1-1/4-12
1-1/4"-12 HS Bottoming Tap 0331-0136 1 1/4-12 1-11/64"

$76.00 TAB-1-3/8-6
1-3/8"-6 HS Bottoming Tap 0331-0151 1 3/8-6 1-7/32"

$76.00 TAB-1-3/8-12
1-3/8"-12 HS Bottoming Tap 0331-0166 1 3/8-12 1-19/64"

$87.00 TAB-1-1/2-6
1-1/2"-6 HS Bottoming Tap 0331-0181 1 1/2-6 1-11/32"

$87.00 TAB-1-1/2-12
1-1/2"-12 HS Bottoming Tap 0331-0196 1 1/2-12 1-27/64"

Tapfree 2 Cutting Fluid

We have temporarily removed these items from our catalog while we re-organize our inventory.
Tapfree 2 Cutting Fluid.
For all metals except magnesium.
Environmentally safe, water-based fluid.
Used for tapping, milling, drilling, etc.
Quickly penetrates to the cutting edge and reduces friction and heat generated during cutting.
Safer than chlorinated solvents or oils.
Intended to be used full strength (primarily through misting or direct application), and not in recirculators. The viscosity of these fluids makes pumping difficult.

Please note: these cutting and tapping fluids ship by GROUND ONLY !
These products are NOT available for export.
Quantity Price Model Description
Out of stock
$11.16 CF-T2-PT
Tapfree 2, Pint WT:6720-70
Out of stock
$62.40 CF-T2-GA
Tapfree 2, Gallon

Straight Tap Wrenches

Straight-arm tap wrenches.
Straight tap wrenches provide greater force than t-handle tap wrenches.

Follow this link to explore our complete offering of taps, dies, and other threading tools.
Quantity Price Model Description Hand Taps # Size Taps Pipe Taps MM Taps Approx. Length

$5.20 STW-A
1/16" - 1/4" Straight Tap Wrench 0373-0005 1/16" - 1/4" 0-14 - 1 -5mm 7"

$7.20 STW-B
1/16" - 3/8" Straight Tap Wrench 0373-0010 1/16" - 3/8" 4-14 1/16" 3 - 9mm 8"

$8.50 STW-C
5/32" - 1/2" Straight Tap Wrench 0373-0015 5/32" - 1/2" 7-14 1/16-1/8" 4 - 12mm 10-12" (varies)

$12.50 STW-D
3/16" - 3/4" Straight Tap Wrench 0373-0020 3/16" - 3/4" 10-14 1/16 - 1/4" 5 - 18mm 13"

$17.50 STW-E
1/4" - 1-1/8" Straight Tap Wrench 0373-0025 1/4" - 1 1/8" - 1/8 - 1/2" 6 - 28mm 19"

$54.00 STW-G
3/4" - 1-1/2" Straight Tap Wrench 0373-0050 3/4" - 1 1/2" - 3/8 - 1 1/4" 19 - 38mm 35"

$96.00 STW-H
1" - 2-1/2" Straight Tap Wrench 0373-0060 1" - 2 1/2" - 3/4 - 2" 25 -65mm 55"

Carbide Taps

We can custom make carbide taps in as little as 24 hours.
Carbide taps work best in plastics, powdered metals, fiberglass, bakelite, teflon, etc.
Please either email us at sales@victornet.com or call 1-800-723-5359 for a quotation.
Quantity Price Model Description