Boring Bars - Indexable
Mecabore Style Boring Bars |
|
We have temporarily removed these items from our catalog while we re-organize our inventory.
Uses standard TPMR carbide indexable boring bar inserts.
Positive cutting angle with chipbreaker. Unique position increases rigidity.
Each bar includes hex key, clamp, and screw. Replacement parts are available; see below.
Inserts are not included.
Made in the USA.
Follow this link to see the corresponding Carbide Inserts for Mecabore Style Boring Bars..
|
Quantity
|
Price
|
Model
|
Description
|
Shank |
Min. Bore |
Uses clamp & screw |
Overall length |
Inserts used |
Out of stock
|
$1000.00 | MEC-5
| 3/8" Mecabore Style Boring Bar | 3/8" |
13/32" |
204, 2041 |
5" |
TPMR 730,731 |
Out of stock
|
$1000.00 | MEC-6
| 1/2" Mecabore Style Boring Bar | 1/2" |
35/64" |
204, 2041 |
6" |
TPMR 730,731 |
Out of stock
|
$1000.00 | MEC-7
| 5/8" Mecabore Style Boring Bar | 5/8" |
45/64" |
208, 2081 |
7" |
TPMR 321, 322, 323 |
Out of stock
|
$1000.00 | MEC-8
| 3/4" Mecabore Style Boring Bar | 3/4" |
51/64" |
208, 2081 |
8" |
TPMR 321, 322, 323 |
Out of stock
|
$1000.00 | MEC-9
| 1" Mecabore Style Boring Bar | 1" |
1 5/64" |
208, 2081 |
9" |
TPMR 321, 322, 323 |
Out of stock
|
$1000.00 | MEC-204
| 204 Clamp for Mecabore 5,6 | - |
- |
- |
- |
- |
Out of stock
|
$1000.00 | MEC-2041
| 2041 screw for Mecabore 5,6 | - |
- |
- |
- |
- |
Out of stock
|
$1000.00 | MEC-208
| 208 Clamp for Mecabore 7,8,9 | - |
- |
- |
- |
- |
Out of stock
|
$1000.00 | MEC-2081
| 2081 screw for Mecabore 7,8,9 | - |
- |
- |
- |
- |
Mini Toolholder and Boring Bar Set |
|
Set of 4 toolholders and 1 boring bar for precision turning and boring.
The set includes 10 coated inserts, a torx wrench, and 2 spare screws.
The turning toolholders have .315" square shanks and are 2.36" long.
The boring bar has a shank with 3 flattened sides at 90 degrees (like 3 sides to a square) with a fourth convex side. Height is .274", width is .294". The bar is 4" long.
Included Toolholders:
SCLCR 4-2, uses insert CCMT-21.51, for turning.
SDJCR 4-2, uses insert DCMT-21.51, for turning.
SDJCL 4-2, uses insert DCMT-21.51, for turning.
SSDCN 4-2, uses insert SCMT-21.51, for turning.
SI-SCLCR-04-2, uses insert CCMT-21.51, for boring.
|
Quantity
|
Price
|
Model
|
Description
|
Out of stock
|
$289.90 | THS-50
| Mini Toolholder & Boring Bar Set w/ 10 inserts |
|