1-800-723-5359

Metalworking Tools and Supplies

Shop

Express Order

Model # Qty

Info

Contact

Account

Angle Plates and Angle Blocks

Square Angle Plates

Square Angle Plates.
Solid faces (no slots).
Precision Ground semi-steel, except 12" which is machined.

May have 1 rib or 2 ribs.
Usually sizes to 6" have 1 rib and 8" and larger have 2 ribs, but email about the number of ribs on a specific size if this is crucial to your application.
Quantity Price Model Description Size

$11.40 APS-10
1" x 1" x 1" Square Angle Plate 1" x 1" x 1"

$22.50 APS-20
2" x 2" x 2" Square Angle Plate 2" x 2" x 2"

$32.40 APS-30
3" x 3" x 3" Square Angle Plate 3" x 3" x 3"

$56.50 APS-40
4" x 4" x 4" Square Angle Plate 4" x 4" x 4"

$106.90 APS-50
5" x 5" x 5" Square Angle Plate 5" x 5" x 5"

$155.00 APS-60
6" x 6" x 6" Square Angle Plate 6" x 6" x 6"

$212.00 APS-80
8" x 8" x 8" Square Angle Plate 8" x 8" x 8"
Out of stock
 $398.00 APS-100
10" x 10" x 10" Square Angle Plate 10" x 10" x 10"
Out of stock
 $546.00 APS-120
12" x 12" x 12" Square Machined Angle Plate 12" x 12" x 12"

Webbed End Slotted Angle Plates

Slotted Angle Plates, Webbed Ends.
Machined Square and Parallel on outer faces and ends.
Inner faces are painted and are not flat.
Made from seasoned castings.
Quantity Price Model Description "A" Length "B" 1st Angle "C" 2nd Angle

$33.00 AP-200
3 1/2 x 3 x 2-1/2 Web Angle Plate, 2128-0003 3 1/2" 3" 2 1/2"

$36.00 AP-201
4 1/2 x 3-1/2 x 3 Web Angle Plate, 2128-0005 4 1/2" 3 1/2" 3"

$63.00 AP-202
6 x 5 x 4-1/2 Web Angle Plate, 2128-0010 6" 5" 4 1/2"

$72.50 AP-203
7 x 5-1/2 x 4-1/2 Web Angle Plate, 2128-0013 7" 5 1/2" 4 1/2"

$101.00 AP-204
8 x 6 x 5 Web Angle Plate, 2128-0015 8" 6" 5"

$135.00 AP-205
9 x 7 x 6 Web Angle Plate, 2128-0017 9" 7" 6"
Out of stock
 $171.00 AP-206
10 x 8 x 6 Web Angle Plate, 2128-0020 10" 8" 6"
Out of stock
 $181.00 AP-207
12 x 9 x 8 Web Angle Plate, 2128-0022 12" 9" 8"

Open End Slotted Angle Plates

Slotted Angle Plates, with Open Ends.
Machined Square and Parallel on outer faces.
Inner faces are painted and not flat.
Made from seasoned castings.
Quantity Price Model Description "A" Length "B" 1st Angle "C" 2nd Angle

$49.00 AP-301
4 1/2 x 3-1/2 x 3 Open Angle Plate 4 1/2" 3 1/2" 3"

$69.00 AP-302
6 x 5 x 4-1/2 Open Angle Plate 6" 5" 4 1/2"

$99.00 AP-303
7 x 5-1/2 x 4-1/2 Open Angle Plate 7" 5 1/2" 4 1/2"

$124.00 AP-304
8 x 6 x 5 Open Angle Plate 8" 6" 5"

$149.00 AP-305
9 x 7 x 6 Open Angle Plate 9" 7" 6"

$181.00 AP-306
10 x 8 x 6 Open Angle Plate 10" 8" 6"

$235.00 AP-307
12 x 9 x 8 Open Angle Plate 12" 9" 8"

Universal Right Angle Irons

Universal Right Angle Irons are ideal wherever square surfaces are required for checking or layout work.
Made of the finest quality, close grained semi-steel castings.
Stress is relieved against distortion by annealing after natural seasoning.
Square and parallel to within .002" over 6" run.
Quantity Price Model Description Width (A) Depth (B) Height (C)

$39.00 UR1M
3 3/4" Universal Right Angle Iron, 2131-0005 3 3/4" 4" 5"

$42.25 UR2M
4" Universal Right Angle Iron, 2131-0010 4" 4" 6"

$69.50 UR4M
4 1/2" Universal Right Angle Iron, 2131-0020 4 1/2" 5" 8"

$127.00 UR5M
5" Universal Right Angle Iron, 2131-0025 5" 8" 12"

$109.35 UR6M
5 1/2" Universal Right Angle Iron, 2131-0030 5 1/2" 7" 10"
Out of stock
 $115.25 UR7M
5 1/2" Universal Right Angle Iron, 2131-0035 5 1/2" 8" 10"
Out of stock
 $119.00 UR8M
6" Universal Right Angle Iron, 2131-0040 6" 6" 8"

Angle Block Set

A simplified accurate, quick and direct method for angle set-ups in tooling, production and inspection. Ten Blocks. Furnished in 1 degree increments to 5 degrees and in 5 degree increments to 30 degrees. Oil-hardened steel, precision ground.
Size 3" long x 1/4" thick.
Accuracy .0001" per inch.
Lightly magnetized for better holding. In fitted case.
Quantity Price Model Description

$45.60 ANG-10
Angle Block Set, 10 piece, 1291-0080

Solid Angle Plates

Set of 2 hardened and ground steel angle plates with mounting holes.
One is 30°/60°/90°, the other 45°/45°/90°.
Long side of each plate is approximately 4 inches.
Quantity Price Model Description

$34.90 ANG-2
Solid Angle Plates, Set of 2, 2127-0025

Universal Angle Block Set

The combination of 10°, 15° and 30° vee blocks and 5 angle plates, 1° to 5°, provides fast and easy setups at various angles in 1° increments.
All pieces heat-treated 45-50 Rc and precision-ground to plus or minus 10 seconds.
Vee block dimensions: 3" long, 1 3/16" wide, 1 3/16" high.
Angle plate dimensions: 2 3/4" long, 1 3/16" wide, 5/64" high at narrow end.
In wood case.
Quantity Price Model Description

$69.00 ANG-8
Universal Angle Block Set, 1291-0082

Thin Angles and Parallels

Economy thin angle and parallel sets are precision ground on the working surface only. Full hardened steel. 5/32" thick.

Model ANG-6 - Set of 6 angles, 1/2° through 5°; 3 1/2" long.
Model ANG-5 - Set of 5 angles, 6° through 10°; 3 1/2" long.
Model PP-04 - Set of 4 pairs of parallels, 3" long. 1 pair each of 1/2", 5/8", 3/4", 7/8".
Set ANG-ST3 includes all 3 sets at a special low price.
Quantity Price Model Description
Out of stock
 $12.50 PP-04
Set of 4 Pairs of Thin Parallels, 1291-0015

$9.50 ANG-5
Set of 5 Thin Angles, 6- 10 deg, 1291-0020

$10.50 ANG-6
Set of 6 Thin Angles, 1/2- 5 deg, 1291-0010
Out of stock
 $27.50 ANG-ST3
Set of ANG-5, ANG-6, PP-04 (ONE EACH: 1291-0010, 0015, 0020)

Home Alphabetical Index Site Map

Victor Machinery Exchange
12155 Stephens Road
Warren, MI 48089-3962

Phone: (800) 723-5359
Email / Customer Service: sales@victornet.com