1-800-723-5359

Metalworking Tools and Supplies

Shop

Express Order

Model # Qty

Info

Contact

Account

Other Indicator Holders & Accessories

Universal Indicator Holder for Bridgeport Type Mills

Reach from 0 to 12" diameter. Suitable for all popular indicators with 5/32" shank or dovetail.
Mounts with single pressure screw directly on machine quill, bypassing the working tool.
1 7/8" clamp diameter- quality import.

Special price of only $9.90 with purchase of any dial test indicator!
(order the indicator and holder sets with model numbers ending "-st")

Please note:NO indicator is included with the holder when the holder is a stand-alone purchase.
Quantity Price Model Description

$15.75 ACC-IH22
Universal Indicator Holder, 1276-0065

Zero-Set Indicator Holders

The Zero-Set dial indicator holders fit all dovetail equipped indicators, and are used to check the alignment of the centers of round material in relation to the cutting head.
Speeds up set-up operations tremendously!
Manufactured with 1/4", 3/8", and 1/2" spindle post and has an effective measuring range of 3/8" to 10".
Quick adjustments and line adjustment controls.

The Accurate Manufacturing model AA-9860M is compatible with the zero-set universal attachment AA-9865M featured below.

Model ACC-ZERO is a quality import but will not take the zero-set universal attachment.

Indicator is NOT included with the purchase of the Zero-Set.
Quantity Price Model Description
Out of stock
 $123.75 AA-9860M
Zero-Set Indicator Holder - Accurate Manufacturing

$22.50 ACC-ZERO
Zero-Set Indicator Holder, Import

Zero-Set Universal Attachment

A unique attachment for our Accurate manufacturing Zero-Set that allows placement of any test indicator equipped with dovetails or 1/4" posts in a multitude of positions.
Angles up to 90° on either side, and bends both forwards and backwards.
Attaches in seconds to Zero-Set AA-9860M.

Made by Accurate Manufacturing.

This attachment is ONLY compatible with the US-made model AA-9860M Zero-Set.
The import Zero-Set ACC-ZERO IS NOT compatible with this attachment.
Quantity Price Model Description

$98.75 AA-9865M
Zero-Set Universal Attachment - Accurate Manufacturing

Swivel Joints

These dial indicator accessories are for clamping indicators and other instruments.
Quantity Price Model Description Clamp Hole End Hole
Out of stock
 $11.00 AA-7000
5/16 x 5/32 Swivel Joint 5/16" 5/32"

$11.00 AA-7002
5/16 x 1/4 Swivel Joint 5/16" 1/4"
Out of stock
 $14.50 AA-7004
3/8 x 1/4 Swivel Joint 3/8" 1/4"

$14.50 AA-7006
1/4 x 1/4 Swivel Joint 1/4" 1/4"

$16.40 AA-7008
5/16 x 5/16 Swivel Joint 5/16" 5/16"
Out of stock
 $16.40 AA-7010
3/8 x 5/16 Swivel Joint 3/8" 5/16"
Out of stock
 $18.95 AA-7012
3/8 x 3/8 Swivel Joint 3/8" 3/8"

$18.95 AA-7014
1/2 x 3/8 Swivel Joint 1/2" 3/8"

Dial Test Indicator Holder

We have temporarily removed these items from our catalog while we re-organize our inventory.

Model AA-9008SS (Stainless model is current production.)
Universal dovetail indicator with swivel.
2-1/4" long (excluding swivel), 1/4" diameter shank.
These dial test indicator holders are made by Accurate Manufacturing.
Quantity Price Model Description

$17.85 AA-9008SS
Universal Dovetail Ind Holder w/ Swivel, Stainless Steel, 1276-0080

Double Jointed Holder for Dial Test Indicators

We have temporarily removed these items from our catalog while we re-organize our inventory.

Model AA-9665.
Double jointed dial test indicator holder.
3/8" diameter, with 4-1/2" reach.
For dial test indicators with dovetails.
Made by Accurate manufacturing.
Quantity Price Model Description

Noga Test Indicator Holder Arm

Noga Test Indicator Holder Arm.
Use for centering holes on milling machines.
Ideal for placing parts in parallel on milling machines.
5/16" diam. x 1 1/2" long shank.
Quantity Price Model Description

$63.00 NOG-NF1018
Noga Test Indicator Holder Arm WT:1205-0410

Depth Base Attachment for Dial Indicators

Turns any AGD dial indicator with a 3/8" stem into a depth measuring device.
Steel base is precision ground flat and parallel on both top and bottom.
Set screw in base holds the indicator in place.
Black Oxide coated.

Made by Accurate Manufacturing.
Quantity Price Model Description Width

$29.40 AA-9228
2-1/2" Indicator Depth Base Attachment 2-1/2"
Out of stock
 $34.00 AA-9229
4" Indicator Depth Base Attachment 4"

Dial Indicator Point Kits

The most useful accessory for all dial indicators - a complete set of 22 different points, increasing the versatility of your indicators. 4-48 threads on points.
Quantity Price Model Description Origin

$4.90 ACC-SP1
Import Select-a-Point Kit Import

$17.50 AA-9000
Accurate Manufacturing Select-a-Point Kit Accurate Manufacturing

Indicator Points

Standard 4-48 thread fits on all AGD standard indicators and on caliper clamp-on jaw accessory kit. Heat-treated steel.
Quantity Price Model Description Diam.

$7.05 AA-9366
3/8" Flat Anvil Indicator Point 3/8"

$8.30 AA-9367
1/2" Flat Anvil Indicator Point 1/2"

$11.30 AA-9370
3/4" Flat Anvil Indicator Point 3/4"

$18.80 AA-9369
1" Flat Anvil Indicator Point 1"

$5.95 AA-9355
3/8" Button Anvil Indicator Point 3/8"

$5.95 AA-9356
1/2" Button Anvil Indicator Point 1/2"

$9.40 AA-9357
3/4" Button Anvil Indicator Point 3/4"

Dial Indicator Point Accessories

Model AA-9344 allows the use of standard indicator points with male 4-48 threads on Metric dial indicators with 2.5m x .45 female threads.

Model AA-9340 is a 2" extension for 4-48 threaded indicator points.
Useful for measuring in holes, deep grooves or hard to reach spots.

Model AA-9350 is a set of 1", 2", and 3" extensions for 4-48 threaded indicator points.
The extensions can be combined to give up to 6" of extension.
Quantity Price Model Description

$7.20 AA-9344
Metric Adapter for 4-48 Indicator Points

$7.35 AA-9340
2" Indicator Point Extension

$18.85 AA-9350
Indicator Point Extension Kit -1",2",3"

Surface Gage

Base and scriber hardened.
Base has V-groove for work on round stock.
Spindle has fine adjustment.
Retractable pins in base for work on surface plate.
With hardened steel scriber.
Quantity Price Model Description

$17.50 SG-47
Surface Gage with 4" and 7" Spindles, 1248-0005

$27.50 SG-12
Surface Gage with 9" and 12" Spindles, 1248-0011

Granite Check Indicator Stand

Black granite surface plate and dial indicator stand.
Microscrew fingertip control.
.0005" flatness.
Full 6" square base, 2" thick.
8" column height.
Accepts all AGD Indicators.

Set GRA-S22 includes the granite Check with a VDI-2 dial indicator.
This indicator features 1" travel, and a 0-100 dial face graduated in .001"
Quantity Price Model Description
Out of stock
 $38.60 GRA-3
Granite Check Indicator Stand, 1276-0050
Out of stock
 $51.30 GRA-S22
GRA-3 Granite Check with VDI-2 Dial Indicator, 1276-0050 and 1272-0005

Fowler Bore Gage Setting Master

Sets dial bore gages up to 6" to an accuracy of .0001"

INCLUDES: Setting device, 36 piece economy gage block set, and aluminum case
Dial Bore Gage is NOT included.

Setting Device:
Base anvil: 2.750" x .80"
(2) Adjustable anvils: 2.375" x .375"
Internal capacity: 6"
Depth capacity: 1"
Centralizer capacity width: 2.625"
Quick-release holder for fast adjustment.

36 Piece Economy Gage Block Set (included):
Tolerance: +/- .00005"
Certificate of Calibration to N.I.S.T.
Quantity Price Model Description
Out of stock
 $215.60 FOW-53-646-000
Fowler Bore Gage Setting Master Kit

Home Alphabetical Index Site Map

Victor Machinery Exchange
12155 Stephens Road
Warren, MI 48089-3962

Phone: (800) 723-5359
International: (718) 899-1502

Email: sales@victornet.com